Advanced Node.js Development
Master Node.js by building real-world applications
Andrew Mead
BIRMINGHAM - MUMBAI
Advanced Node.js
Development
Copyright © 2018 Packt Publishing
All rights reserved. No part of this book may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, without the prior written permission of the publisher, except in the case of brief
quotations embedded in critical articles or reviews.
Every effort has been made in the preparation of this book to ensure the accuracy of the information presented.
However, the information contained in this book is sold without warranty, either express or implied. Neither the
author, nor Packt Publishing or its dealers and distributors, will be held liable for any damages caused or alleged
to have been caused directly or indirectly by this book.
Packt Publishing has endeavored to provide trademark information about all of the companies and products
mentioned in this book by the appropriate use of capitals. However, Packt Publishing cannot guarantee the
accuracy of this information.
Acquisition Editor: Ben Renow-Clarke
Content Development Editor: Monika Sangwan
Technical Editor: Gaurav Gavas
Copy Editor: Tom Jacob
Project Coordinator: Suzanne Coutinho
Proofreader: Safis Editing
Indexer: Rekha Nair
Production Coordinator: Shantanu N. Zagade
First published: March 2018
Production reference: 1290318
Published by Packt Publishing Ltd.
Livery Place
35 Livery Street
Birmingham
B3 2PB, UK.
ISBN 978-1-78839-393-5
www.packtpub.com
Why subscribe?
Spend less time learning and more time coding with
practical eBooks and Videos from over 4,000 industry
professionals
Improve your learning with Skill Plans built especially for
you
Get a free eBook or video every month
Mapt is fully searchable
Copy and paste, print, and bookmark content
PacktPub.com
Did you know that Packt offers eBook versions of every book
published, with PDF and ePub files available? You can upgrade to
the eBook version at www.PacktPub.com and as a print book customer,
you are entitled to a discount on the eBook copy. Get in touch with
us at service@packtpub.com for more details.
At www.PacktPub.com, you can also read a collection of free technical
articles, sign up for a range of free newsletters, and receive exclusive
discounts and offers on Packt books and eBooks.
Contributors
About the author
Andrew Mead is a full-stack developer living in beautiful
Philadelphia! He launched his first Udemy course in 2014 and had a
blast teaching and helping others. Since then, he has launched three
courses with over 21,000 students and over 1,900 5-star reviews.
Andrew currently teaches Node.js, Gulp, and React. Before he
started teaching, he created a web app development company. He
has helped companies of all sizes launch production web
applications to their customers. He has had the honor of working
with awesome companies such as Siemens, Mixergy, and Parkloco.
He has a Computer Science degree from Temple University, and he
has been programming for just over a decade. He loves creating,
programming, launching, learning, teaching, and biking.
Packt is searching for authors
like you
If you're interested in becoming an author for Packt, please visit auth
ors.packtpub.com and apply today. We have worked with thousands of
developers and tech professionals, just like you, to help them share
their insight with the global tech community. You can make a
general application, apply for a specific hot topic that we are
recruiting an author for, or submit your own idea.
Preface
Welcome to Advanced Node.js Development. This book is packed
with a ton of content, projects, challenges, and real-world examples,
all designed to teach you Node by doing. This means you'll be
getting your hands dirty early on in the upcoming chapters writing
some code, and you'll be writing code for every project. You will be
writing every line of code that powers our applications. Now, we
would require a text editor for this book.
All the projects in the book are fun to build and they were designed
to teach you everything required to launch your own Node app,
from planning to development and testing to deploying. Now, as
you launch these different Node applications and move through the
book, you will run into errors, which is bound to happen. Maybe
something doesn't get installed as expected, or maybe you try to run
an app and instead of getting the expected output, you get a really
long obscure error message. Don't worry, I am there to help. I'll
show you tips and tricks to get pass through those errors in the
chapters. Let's go ahead and get to it.
Who this book is for
This book targets anyone looking to launch their own Node
applications, switch careers, or freelance as a Node developer. You
should have a basic understanding of JavaScript in order to follow
this book.
What this book covers
Chapter 1, Getting Set Up, will be a very basic setup for your local
environments. We'll learn to install MongoDB and Robomongo.
Chapter 2, MongoDB, Mongoose, and REST APIs – Part 1, will help
you learn how to connect your Node applications to the MongoDB
database you've been running on your local machine.
Chapter 3, MongoDB, Mongoose, and REST APIs – Part 2, will help
you start playing with Mongoose and connect to our MongoDB
database.
Chapter 4, MongoDB, Mongoose, and REST APIs – Part 3, will
resolve queries and ID validation after playing with Mongoose.
Chapter 5, Real-Time Web Apps with Socket.io, will help you learn in
detail about Socket.io and WebSockets, help you and create real-
time web applications.
Chapter 6, Generating newMessage and newLocationMessage,
discusses how to generate text and gelocation messages.
Chapter 7, Styling Our Chat Page as a Web App, continues our
discussion on styling our chat page and make it look more like a real
web application.
Chapter 8, The Join Page and Passing Room Data, continues our
discussion about the chat page and look into the join page and
passing room data.
Chapter 9, ES7 classes, will help you learn the ES6 class syntax and
using it creating user's class and some other methods.
Chapter 10, Async/Await Project Setup, will walk you through the
process of learning how async/await works.
To get the most out of this
book
To run the projects in this book, you will need the following:
The latest version of Node.js (9.x.x at the time of writing this
book)
Express
MongoDB
Mongoose
Atom
We'll see the rest of the requirements along the course of the book.
Download the example code
files
You can download the example code files for this book from your
account at www.packtpub.com. If you purchased this book elsewhere, you
can visit www.packtpub.com/support and register to have the files emailed
directly to you.
You can download the code files by following these steps:
1. Log in or register at www.packtpub.com.
2. Select the SUPPORT tab.
3. Click on Code Downloads & Errata.
4. Enter the name of the book in the Search box and follow the
onscreen instructions.
Once the file is downloaded, please make sure that you unzip or
extract the folder using the latest version of:
WinRAR/7-Zip for Windows
Zipeg/iZip/UnRarX for Mac
7-Zip/PeaZip for Linux
The code bundle for the book is also hosted on GitHub at https://githu
b.com/PacktPublishing/Advanced-Node.js-Development. We also have other code
bundles from our rich catalog of books and videos available at https:/
/github.com/PacktPublishing/. Check them out!
Conventions used
There are a number of text conventions used throughout this book.
CodeInText: Indicates code words in text, database table names, folder
names, filenames, file extensions, pathnames, dummy URLs, user
input, and Twitter handles. Here is an example: "Mount the
downloaded WebStorm-10*.dmg disk image file as another disk in your
system."
A block of code is set as follows:
html, body, #map {
height: 100%;
margin: 0;
padding: 0
}
When we wish to draw your attention to a particular part of a code
block, the relevant lines or items are set in bold:
[default]
exten => s,1,Dial(Zap/1|30)
exten => s,2,Voicemail(u100)
exten => s,102,Voicemail(b100)
exten => i,1,Voicemail(s0)
Any command-line input or output is written as follows:
$ cd css
Bold: Indicates a new term, an important word, or words that you
see onscreen. For example, words in menus or dialog boxes appear
in the text like this. Here is an example: "Select System info from
the Administration panel."
Warnings or important notes appear like this.
Tips and tricks appear like this.
Get in touch
Feedback from our readers is always welcome.
General feedback: Email feedback@packtpub.com and mention the book
title in the subject of your message. If you have questions about any
aspect of this book, please email us at questions@packtpub.com.
Errata: Although we have taken every care to ensure the accuracy
of our content, mistakes do happen. If you have found a mistake in
this book, we would be grateful if you would report this to us. Please
visit www.packtpub.com/submit-errata, selecting your book, clicking on the
Errata Submission Form link, and entering the details.
Piracy: If you come across any illegal copies of our works in any
form on the Internet, we would be grateful if you would provide us
with the location address or website name. Please contact us at
copyright@packtpub.com with a link to the material.
If you are interested in becoming an author: If there is a
topic that you have expertise in and you are interested in either
writing or contributing to a book, please visit authors.packtpub.com.
Reviews
Please leave a review. Once you have read and used this book, why
not leave a review on the site that you purchased it from? Potential
readers can then see and use your unbiased opinion to make
purchase decisions, we at Packt can understand what you think
about our products, and our authors can see your feedback on their
book. Thank you!
For more information about Packt, please visit packtpub.com.
Getting Set Up
In this chapter, you'll get your local environment set up for the rest
of the book. Whether you're on macOS, Linux, or Windows, we'll
install MongoDB and Robomongo.
More specifically, we'll cover the following topics:
MongoDB and Robomongo installation for Linux and
macOS
MongoDB and Robomongo installation for Windows
Installing MongoDB and
Robomongo for Linux and
macOS
This section is for macOS and Linux users. If you are on Windows, I
have written a separate section for you.
The first thing we'll do is to download and set up MongoDB, as this
will be the database we will use. We'll be using a third-party service
to host our database when we eventually deploy it to Heroku, but on
our local machine we'll need to download MongoDB so that we can
start up a database server. This will let us connect to it via our Node
applications to read and write data.
In order to grab the database, we'll head over to mongodb.com. Then we
can go to the Download page and download the appropriate
version.
On this page, scroll down and select Community Server; this is the
one we'll be using. Also, there are options for different operating
systems, whether it's Windows, Linux, macOS, or Solaris. I'm on
macOS, so I'll use this download:
If you're on Linux, click on Linux; then go to the Version drop down
and select the appropriate version. For example, if you're on
Ubuntu 14.04, you can download the correct one from the Linux
tab. Then, you can simply click on the Download button and follow
along.
Next you can open it up. We'll just extract the directory, creating a
brand new folder in the Downloads folder. If you're on Linux, you might
need to manually extract the contents of that archive into the
Downloads folder.
Now this folder contains a bin folder, and in there we have all of the
executables that we need in order to do things such as connecting to
the database and starting a database server:
Before we go ahead and run any of them. We'll rename this
directory to mongo and then move it into the user directory. You can
see that now in the user directory, I have the mongo folder. We'll also
create a brand new directory alongside of mongo called mongo-data, and
this will store the actual data inside of the database:
So when we insert a new record into the Todos table, for example,
that will live in the mongo-data folder. Once you have the mongo folder
moved into the user directory and you have the new mongo-data folder,
you are ready to actually run the database server from Terminal. I'll
go into Terminal and navigate into that brand new mongo folder that
is in the user directory, where I currently am, so I can cd into mongo,
then I'll cd into the bin directory by tacking it on right there:
cd mongo/bin
From here, we have a bunch of executables that we can run:
We have things such as bisondump and mongodump. In this
section, we'll focus on: mongod, which will start up the database
server, and mongo, which will let us connect to the server and run
some commands. Just like when we type node we can run some
JavaScript commands right in Terminal, when we type mongo, we'll be
able to run some Mongo commands to insert, fetch, or do anything
we like with the data.
First up though, let's start up the database server. I'll use ./ to run a
file in the current directory. The file we'll run is called mongod; also,
we do need to provide one argument: the dbpath argument. The dbpath
argument will get set equal to the path of the directory we just
created, the mongo-data directory. I'll use ~ (the tilde) to navigate to the
user directory, and then to /mongo-data, as shown here:
./mongod --dbpath ~/mongo-data
Running this command will start up the server. This will create an
active connection, which we can connect to for manipulating our
data. The last line that you see when you run the command should
be, waiting for connections on port 27017:
If you see this, it means that your server is up and running.
Next up, let's open a new tab, which starts in the exact same
directory, and this time around, instead of running mongod, we'll run
the mongo file:
./mongo
When we run mongo, we open up a console. It connects to the
database server we just started, and from here, we can start running
some commands. These commands are just to test that things are
working as expected. We'll be going over all of this in detail later in
this section. For now though, we can access db.Todos, and then we'll
call .insert to create a brand new Todo record. I'll call it like a
function:
db.Todos.insert({})
Next, inside of insert, we'll pass in our document. This will be the
MongoDB document we want to create. For now, we'll keep things
really simple. On our object, we'll specify one attribute, text, setting
it equal to a string. Inside of quotes, type anything you want to do.
I'll say Film new node course:
db.Todos.insert({text: 'Film new node course'})
With your command looking just like this, you can press enter, and
you should get back a WriteResult object with an nInserted
property, which is short for the number inserted: a value set to 1.
This means that one new record was created, and that is fantastic!
Now that we've inserted a record, let's fetch the record just to make
sure that everything worked as expected.
Instead of calling insert, we'll call find without any arguments. We
want to return every single item in the Todos collection:
db.Todos.find()
When I run this, what do we get? We get one object-looking thing
back:
We have our text attribute set to the text that we provided, and we
have an _id property. This is the unique identifier for each record,
which we'll talk about later. As long as you're seeing the text
property coming back to what you set, you are good to go.
We can shut down the mongo command. However, we will still leave
the mongod command running because there's one more thing I want
to install. It's called Robomongo, and it's a graphic user interface
for managing your Mongo database. This will be really useful as you
start playing around with Mongo. You'll be able to view the exact
data saved in the database; you can manipulate it and do all sorts of
stuff.
Over in Finder, we have our mongo-data directory, and you can see
that there is a ton of stuff in here. This means that our data was
successfully saved. All of the data is in this mongo-data directory. To
download and install Robomongo, which is available for Linux,
Windows and macOS, we'll head over to robomongo.org and grab the
installer for our operating system:
We can click on Download Robo 3T and download the most recent
version; it should automatically detect your OS. Download the
installer for either Linux or macOS. The one for macOS is really
simple. It's one of those installers where you take the icon and drag
it into the Applications folder. For Linux, you'll need to extract the
archive and run the program in the bin directory. This will start up
Robomongo on your Linux distribution.
Since I'm using macOS, I'll just quickly drag the icon over to
Applications, and then we can play around with the program itself.
Next, I'll open it up inside the Finder. When you first open up
Robomongo, you might get a warning like the following on macOS,
since it's a program that we downloaded and it's not from an
identified macOS developer:
This is fine; most programs you download from the web will not be
official since they did not come from the App Store. You can right-
click on the downloaded package, select Open, and then click on
Open again to run that program. When you first open it, you'll see
some screens like the following:
We have a little screen in the background and a list of connections;
currently that list is empty. What we need to do is to create a
connection for our local MongoDB database so that we can connect
to it and manipulate that data. We have Create. I'll click on this, and
the only thing we'll need to update is Name. I'll give it a more
descriptive name, such as Local Mongo Database. I'll set Address to
localhost and the 27017 port is correct; there's no need to change these.
So, I'll click on Save:
Next, I'll double-click on the database to connect to it. Inside the
tiny window, we have our database. We are connected to it; we can
do all sorts of things to manage it.
We can open up the test database, and in there, we should see one
Collections folder. If we expand this folder, we have our Todos
collection, and from there, we can right-click on the collection.
Next, click on View Documents, and we should get our one Todo
item, the one that we created over inside the Mongo console:
I can expand it to view the text property. Film new node course
shows up:
If you're seeing this, then you are done.
The next section is for Windows users.
Installing MongoDB and
Robomongo for Windows
If you're on Windows, this is the installation section for you. If
you're on Linux or macOS, the previous section was for you; you
can skip this one. Our goal here is to install MongoDB on our
machines, which will let us create a local MongoDB database server.
We'll be able to connect to that server with Node.js, and we'll be
able to read and write data to the database. This will be fantastic for
the Todo API, which will be responsible for reading and writing
various Todo-related information.
To get started, we'll grab the MongoDB installer by going over to mon
godb.com. Here we can click on the big green Download button; also,
we can see several options on this page:
We'll use Community Server and for Windows. If you go to the
Version drop down, none of the versions there will look right for
you. The top one is what we want: Windows Server 08 R2 64-bit
and later with SSL support. Let's start to download this. It is slightly
big; just a tad over 100 MB, so it will take a moment for the
download to begin.
I'll start it up. It's one of those basic installers, where you click on
Next a few times and you agree to a license agreement. Click on the
Custom option for a second, although we will be following through
with the Complete option. When you click on Custom, it will show
you where on your machine it's going to be installed, and this is
important. Here, you can see that for me it's on C:\Program
Files\MongoDB\Server, then in the 3.2 directory:
This is going to be important because we'll need to navigate into
this directory in order to start up the MongoDB server. I will go
back though, and I will be using the Complete option, which installs
everything we need. Now we can actually start the installation
process. Usually, you have to click on Yes, verifying that you want to
install the software. I'll go ahead and do that, and then we are done.
Now once it's installed, we'll navigate into Command Prompt and
boot up a server. The first thing we need to do is to navigate into
that Program Files directory. I'm in Command Prompt. I recommend
that you use Command Prompt and not Git Bash. Git Bash will not
work for starting up the MongoDB server. I'll navigate to the root of
my machine using cd/, and then we can start navigating to that path
using the following command:
cd Program Files/MongoDB/Server/3.2
This is the directory where MongoDB was installed. I can use dir to
print out the contents of this directory, and what we care about here
is the bin directory:
We can navigate into bin using cd bin, and print its contents out using
dir. Also, this directory contains a whole bunch of executables that
we'll use to do things such as starting up our server and connecting
to it:
The first executable we'll run is this mongod.exe file. This will start
our local MongoDB database. Before we can go ahead and run this
EXE, there is one more thing we need to do. Over in the generic File
Explorer, we need to create a directory where all of our data can be
stored. To do this, I'll put mine in my user directory by going to the
C:/Users/Andrew directory. I'll make a new folder, and I'll call this folder
mongo-data. Now, the mongo-data directory is where all of our data will
actually be stored. This is the path that we need to specify when we
run the mongod.exe command; we need to tell Mongo where to store
the data.
Over in Command Prompt, we can now start this command. I'll run
mongod.exe, passing in as the dbpath argument, the path to that folder we
just created. In my case, it's /Users/Andrew/mongo-data. Now if your
username is different, which it obviously is, or you put the folder in
a different directory, you'll need to specify the absolute path to the
mongo-data folder. Once you have that though, you can start up the
server by running the following command:
mongod.exe --dbpath /Users/Andrew/mongo-data
You'll get a long list of output:
The only thing you need to care about is that, at the very bottom,
you should see waiting for connections on port 27017. If you see
this, then you are good to go. But now that the server is up, let's
connect to it and issue some commands to create and read some
data.
Creating and reading data
To do this, we'll open up a second Command Prompt window and
navigate into that same bin directory using cd/Program
Files/MongoDB/Server/3.2/bin. From here, we'll run mongo.exe. Note that
we're not running the mongod command; we're running mongo.exe. This
will connect to our local MongoDB database, and it will put us in
sort of a Command Prompt view of our database. We'll be able to
issue various Mongo commands to manipulate the data, kind of like
we can run Node from Command Prompt to run various JavaScript
statements right inside the console. When we run this, we're going
to connect to the database. Over in the first console window, you
can see that connection accepted shows up. We do have a new
connection. In the first console window now, we can run some
commands to create and read data. Now I don't expect you to take
away anything from these commands. We'll not talk about the ins
and outs of MongoDB just yet. All I want to do is to make sure that
when you run them, it works as expected.
To get started, let's create a new Todo from the console. This can be
done via db.Todos, and on this Todos collection, we'll call the .insert
method. Also, we'll call insert with one argument, an object; this
object can have any properties we want to add to the record. For
example, I want to set a text property. This is the thing I actually
need to do. Inside quotes, I can put something. I'll go with Create new
Node course:
db.Todos.insert({text: 'Create new Node course'})
Now when I run this command, it will actually make the insert into
our database and we should get a writeResult object back, with an
nInserted property set to 1. This means that one record was inserted.
Now that we have one Todo in our database, we can try to fetch it
using db.Todos once again. This time, instead of calling insert to add a
record, we'll call find with no arguments provided. This will return
every single Todo inside of our database:
db.Todos.find()
When I run this command, We get an object-looking thing where
we have a text property set to Create new Node course. We also have an _id
property. The _id property is MongoDB's unique identifier, and this
is the property that they use to give your document; in this case, a
Todo, a unique identifier. We'll be talking more about _id and about
all of the commands we just ran, a little later. For now, we can close
this using Ctrl + C. We've successfully disconnected from Mongo,
and now we can also close the second Command Prompt window.
Before we move on, there is one more thing I want to do. We'll be
installing a program called Robomongo—a GUI for MongoDB. It
will let you connect to your local database as well as real databases,
which we'll be talking about later. Also, it'll let you view all the data,
manipulate it and do anything you could do inside a database GUI.
It's really useful; sometimes you just need to dive into a database to
see exactly what the data looks like.
In order to get this started, we'll head over to a new tab and go to rob
omongo.org:
Here we can grab the installer by going to Download. We'll
download the latest version, and I'm on Windows. I want the
installer, not the portable version, so I'll click on the first link here:
This is going to start a really small download, just 17 MB, and we
can click on Next a few times through this one to get Robomongo
installed on our machines.
I'll start the process, confirming installation and clicking on Next
just a couple of times. There's no need to do anything custom inside
the settings. We'll run the installer with all of the default settings
applied. Now we can actually run the program by finishing all the
steps in the installer. When you run Robomongo, you'll be greeted
with a MongoDB Connections screen:
This screen lets you configure all of the connections for
Robomongo. You might have a local connection for your local
database, and you might have a connection to a real URL where
your actual production data is stored. We'll get into all that later.
For now, we'll click on Create. By default, your localhost address and
your 27017 port do not need to be changed:
All I'm going to do is to change the name so that it's a little easier to
identify. I'll go with Local Mongo Database. Now, we can save our new
connection and actually connect to the database by simply double-
clicking on it. When we do that, we get a little tree view of our
database. We have this test database; this is the one that's created
by default, which we can expand. Then we can expand our Collections
folder and see the Todos collection. This is the collection we created
inside the console. I'll right-click on this and go to View Documents.
When I view the documents, I actually get to view the individual
records:
Here, I see my _id and text properties that have Create new Node
course sitting in the above image.
If you are seeing this, then this means that you have a local Mongo
server running, and it also means that you've successfully inserted
data into it.
Summary
In this chapter, you downloaded and ran the MongoDB database
server. This means that we have a local database server we can
connect to from our Node application. We also installed
Robomongo, which lets us connect to our local database so that we
can view and manipulate data. This comes in handy when you're
debugging or managing data, or doing anything else with your
Mongo database. We'll be using it throughout the book, and you'll
begin to see why it's valuable in the later chapters. For now though,
you are all set up. You are ready to continue on and start building
the Todo API.
MongoDB, Mongoose, and
REST APIs – Part 1
In this chapter, you're going to learn how to connect your Node
applications to the MongoDB database you've been running on your
local machine. This means that we'll be able to issue database
commands right inside of our Node apps to do stuff like insert,
update, delete, or read data. This is going to be critical if we're ever
going to make that Todo REST API. When someone hits one of our
API endpoints, we want to manipulate the database, whether it's
reading all of the Todos or adding a new one. Before we can do any
of that though, we have to learn the basics.
Connecting to MongoDB and
writing data
To connect to our MongoDB database from inside of Node.js, we're
going to be using an npm module created by the MongoDB team.
It's called node-mongodb-native, but it includes all of the features
you'll need to connect to and interact with your database. To get to
it, we're going to Google node-mongodb-native:
The GitHub repo, which should be the first link, is the one we want
—the node-mongodb-native repository—and if we scroll down, we
can take a look at a few important links:
First up we have documentation, and we also have our api-docs;
these are going to be critical as we start exploring the features that
we have inside of this library. If we scroll down further on this page,
we'll find a ton of examples on how to get started. We'll be going
through a lot of this stuff in this chapter, but I do want to make you
aware of where you can find other resources because the mongodb-
native library has a ton of features. There are entire courses
dedicated to MongoDB, and they don't even begin to cover
everything that's built-in to this library.
We're going to be focusing on the important and common subset of
MongoDB that we need for Node.js apps. To get started, let's go
ahead and open up the documentations, which are shown in the
preceding image. When you go to the docs page, you have to pick
your version. We'll be using version 3.0 of the driver, and there's
two important links:
The Reference link: This includes guide-like articles,
things to get you started, and other various references.
The API link: This includes the details of every single
method available to you when you're working with the
library. We'll be exploring some of the methods on this link
as we start creating our Node Todo API.
For now though, we can get started by creating a new directory for
this project, and then we're going to go ahead and install the
MongoDB library and connect to the database we have running. I
am going to assume that you have your database running for all the
sections in this chapter. I have it running in a separate tab in my
Terminal.
If you're on Windows, refer to the instructions in the Windows
installation section to start your database if you forget. If you're on
a Linux or macOS operating system, use the instructions I have
already mentioned, and don't forget to also include that dbpath
argument, which is essential for booting up your MongoDB server.
Creating a directory for the
project
To kick things off, I'm going to make a new folder on the Desktop
for the Node API. I'll use mkdir to create a new folder called node-todo-
api. Then, I can go ahead and use cd to go into that directory, cd node-
todo-api. And from here, we're going to run npm init, which creates our
package.json file and lets us install our MongoDB library. Once again,
we're going to be using enter to skip through all of the options,
using the defaults for each:
Once we get to the end we can confirm our selections, and now our
package.json file is created. The next thing we're going to do is open up
this directory inside of Atom. It's on the Desktop, node-todo-api. Next
up, inside of the root of the project we're going to create a new
folder, and I'm going to call this folder playground. Inside of this
folder, we'll store various scripts. They're not going to be scripts
related to the Todo API; they'll be scripts related to MongoDB, so I
do want to keep them in the folder, but I don't necessarily want
them to be part of the app. We'll use the playground folder for that, like
we have in the past.
In the playground folder, let's go ahead and make a new file, and we'll
call this file mongodb-connect.js. Inside of this file, we're going to get
started by loading in the library and connecting to the database.
Now in order to do that, we have to install the library. From the
Terminal, we can run npm install to get that done. The new library
name is mongodb; all lowercase, no hyphens. Then, we're going to go
ahead and specify the version to make sure we're all using the same
functionality, @3.0.2. This is the most recent version at the time of
writing. After the version number, I am going to use the --save flag.
This is going to save it as a regular dependency, which it already is:
npm install mongodb@3.0.2 --save
We're going to need this to run the Todo API application.
Connecting the mongodb-
connect file to the database
With MongoDB now installed, we can move it to our mongodb-connect
file and start connecting to the database. The first thing we need to
do is pull something out of the library that we just installed, which
is the mongodb library. What we're looking for is something called the
MongoClient constructor. The MongoClient constructor lets you connect to
a Mongo server and issue commands to manipulate the database.
Let's go ahead and kick things off by creating a constant called
MongoClient. We're going to set that equal to require, and we're going to
require the library we just installed, mongodb. From that library, we're
going to pull off MongoClient:
const MongoClient = require('mongodb').MongoClient;
With the MongoClient now in place, we can call MongoClient.connect to
connect to the database. This is a method, and it takes two
arguments:
The first argument is a string, and this is going to be the
URL where your database lives. Now in a production
example, this might be an Amazon Web Services URL or a
Heroku URL. In our case, it's going to be a localhost URL.
We'll talk about that later.
The second argument is going to be a callback function. The
callback function will fire after the connection has either
succeeded or failed, and then we can go ahead and handle
things appropriately. If the connection failed, we'll print a
message and stop the program. If it succeeded, we can start
manipulating the database.
Adding a string as the first
argument
For the first argument in our case, we're going to start off with
mongodb://. When we connect to a MongoDB database, we want to use
the mongodb protocol like this:
MongoClient.connect('mongodb://')
Next up, it's going to be at localhost since we're running it on our
local machine, and we have the port, which we have already
explored: 27017. After the port, we need to use / to specify which
database we want to connect to. Now, in the previous chapter, we
used that test database. This is the default database that MongoDB
gives you, but we could go ahead and create a new one. After the /,
I'm going to call the database TodoApp, just like this:
MongoClient.connect('mongodb://localhost:27017/TodoApp');
Adding the callback function
as the second argument
Next up, we can go ahead and provide the callback function. I'm
going to use an ES6 arrow (=>) function, and we're going to get past
two arguments. The first one is going to be an error argument. This
may or may not exist; just like we've seen in the past, it'll exist if an
error actually happened; otherwise it won't. The second argument is
going to be the client object. This is what we can use to issue
commands to read and write data:
MongoClient.connect('mongodb://localhost:27017/TodoApp', (err, client) => {
});
Error handling in mongodb-
connect
Now, before we write any data, I'm going to go ahead and handle
any potential errors that come about. I'll do that using an if
statement. If there is an error, we're going to print a message to the
console, letting whoever is looking at the logs know that we were
unable to connect to the database server, console.log, then inside of
quotes put something like Unable to connect to MongoDB server. After the if
statement, we can go ahead and log out a success message, which
will be something like console.log. Then, inside of quotes, we'll use
Connected to MongoDB server:
MongoClient.connect('mongodb://localhost:27017/TodoApp', (err, client) => {
if(err){
console.log('Unable to connect to MongoDB server');
}
console.log('Connected to MongoDB server');
});
Now, when you're handling errors like this, the success code is
going to run even if the error block runs. What we want to do
instead is add a return statement right before the console.log('Unable to
connect to MongoDB server'); line.
This return statement isn't doing anything fancy. All we're doing is
using it to prevent the rest of the function from executing. As soon
as you return from a function, the program stops, which means if an
error does occur, the message will get logged, the function will stop,
and we'll never see this Connected to MongoDB server message:
if(err) {
return console.log('Unable to connect to MongoDB server');
}
An alternative to using the return keyword would be to add an else
clause and put our success code in an else clause, but it's
unnecessary. We can just use the return syntax, which I prefer.
Now, before we run this file, there is one more thing I want to do. At
the very bottom of our callback function, we're going to call a
method on db. It's called client.close:
MongoClient.connect('mongodb://localhost:27017/TodoApp', (err, client) => {
if(err) {
return console.log('Unable to connect to MongoDB server');
}
console.log('Connected to MongoDB server');
const db = client.db('TodoApp');
client.close();
});
This closes the connection with the MongoDB server. Now that we
have this in place, we can actually save the mongodb-connect file and run
it inside of the Terminal. It doesn't do much yet, but it is indeed
going to work.
Running the file in the Terminal
Inside the Terminal, we can run the file using node playground as the
directory, with the file itself being mongodb-connect.js:
node playground/mongodb-connect.js
When we run this file, we get Connected to MongoDB server printing to the
screen:
If we head over into the tab where we have the MongoDB server, we
can see we got a new connection: connection accepted. As you can
see in the following screenshot, that connection was closed down,
which is fantastic:
Using the Mongo library we were able to connect, print a message,
and disconnect from the server.
Now, you might have noticed that we changed the database name in
the MongoClient.connect line in Atom, and we never actually did
anything to create it. In MongoDB, unlike other database programs,
you don't need to create a database before you start using it. If I
want to kick up a new database I simply give it a name, something
like Users.
Now that I have a Users database, I can connect to it and I can
manipulate it. There is no need to create that database first. I'm
going to go ahead and change the database name back to TodoApp. If
we head into the Robomongo program and connect to our local
database, you'll also see that the only database we have is test. The
TodoApp database was never even created, even though we connected
to it. Mongo is not going to create the database until we start adding
data into it. We can go ahead and do that right now.
Adding data to the database
Inside of Atom, before our call to db.close, we're going to insert a new
record into a collection. This is going to be the Todo application.
We're going to have two collections in this app:
a Todos collection
a Users collection
We can go ahead and start adding some data to the Todos collection
by calling db.collection. The db.collection method takes the string name
for the collection you want to insert into as its only argument. Now,
like the actual database itself, you don't need to create this
collection first. You can simply give it a name, like Todos, and you can
start inserting into it. There is no need to run any command to
create it:
db.collection('Todos')
Next, we're going to use a method available in our collection called
insertOne. The insertOne method lets you insert a new document into
your collection. It takes two arguments:
The first one is going to be an object. This is going to store
the various key-value pairs we want to have in our
document.
The second one is going to be a callback function. This
callback function will get fired when things either fail or go
well.
You're going to get an error argument, which may or may not exist,
and you'll also get the result argument, which is going to be
provided if things went well:
const MongoClient = require('mongodb').MongoClient;
MongoClient.connect('mongodb://localhost:27017/TodoApp', (err, client) => {
if(err){
console.log('Unable to connect to MongoDB server');
}
console.log('Connected to MongoDB server');
const db = client.db('TodoApp');
db.collection('Todos').insertOne({
text: 'Something to do',
completed: false
}, (err, result) => {
});
client.close();
});
Inside of the error callback function itself, we can add some code to
handle the error, and then we'll add some code to print the object to
the screen if it was added successfully. First up, let's add an error
handler. Much like we have done previously, we're going to check if
the error argument exists. If it does, then we'll simply print a
message using the return keyword to stop the function from
executing. Next, we can use console.log to print Unable to insert todo. The
second argument I'm going to pass to the console.log is going to be the
actual err object itself, so if someone's looking at the logs, they can
see exactly what went wrong:
db.collection('Todos').insertOne({
text: 'Something to do',
completed: false
}, (err, result) => {
if(err){
return console.log('Unable to insert todo', err);
}
Next to our if statement, we can add our success code. In this case,
all we're going to do is pretty-print something to the console.log
screen, and then I'm going to call JSON.stringify, where we're going to
go ahead and pass in result.ops. The ops attribute is going to store all
of the docs that were inserted. In this case, we used insertOne, so it's
just going to be our one document. Then, I can add my other two
arguments, which are undefined for the filter function, and 2 for the
indentation:
db.collection('Todos').insertOne({
text: 'Something to do',
completed: false
}, (err, result) => {
if(err){
return console.log('Unable to insert todo', err);
}
console.log(JSON.stringify(result.ops, undefined, 2));
});
With this in place, we can now go ahead and execute our file and see
what happens. Inside of the Terminal, I'm going to run the
following command:
node playground/ mongodb-connect.js
When I execute the command, we get our success message: Connected
to MongoDB server. Then, we get an array of documents that were
inserted:
Now as I mentioned, in this case we just inserted one document,
and that shows up as shown in the preceding screenshot. We have
the text property, which gets created by us; we have the completed
property, which gets created by us; and we have the _id property,
which gets automatically added by Mongo. The _id property is going
to be the topic of the following section. We're going to talk in depth
about what it is, why it exists and why it's awesome.
For now, we're going to go ahead and just note that it's a unique
identifier. It's an ID given to just this document. That is all it takes
to insert a document into your MongoDB database using Node.js.
We can view this document inside of Robomongo. I'm going to
right-click the connection, and click Refresh:
This reveals our brand new TodoApp database. If we open that up, we
get our Collections list. We can then go into the Collections, view the
documents, and what do we get? We get our one Todo item. If we
expand it, we can see we have our _id, we have our text property,
and we have our completed Boolean:
In this case, the Todo is not completed, so the completed value is
false. Now, what I want you to do is add a new record into a
collection. This is going to be your challenge for the section.
Adding a new record into a
collection
Inside of Atom, what I'd like you to do is take the code all the way
from db.collection down to the bottom of our callback, and comment
it out. Then, we're going to go ahead and add something following
it. Right previous db.close(), you're going to type Insert new doc into the
Users collection. This doc is going to have a few properties. I want you
to give it a name property; set that equal to your name. Then, we're
going to give it an age property, and last but not least we can give it a
location string. I want you to insert that doc using insertOne. You're
going to need to pass in the new collection name into the collection
method. Then, further down, you're going to add some error-
handling code, and you're going to print the ops to the screen. Once
you rerun the file, you should be able to view your record in the
Terminal and you should be able to refresh things. Over in
Robomongo, you should see the new Users collection, and you
should see your user with the name, age, and location you specified.
Hopefully, you were able to insert a new document into the Users
collection. What you needed to do in order to get this done is call
db.collection so we can access the collection we want to insert into,
which in this case is Users:
//Insert new doc into Users(name, age, location)
db.collection('Users')
Next up, we have to call a method to manipulate the Users collection.
We want to insert a new document, so we're going to use insertOne,
just like we did in the previous sub-section. We're going to pass our
two arguments into insertOne. The first one is the document to insert.
We're going to give it a name property; I'll set that equal to Andrew.
Then, we can go ahead and set the age equal to something like 25.
Lastly, we'll set the location equal to my current location, Philadelphia:
//Insert new doc into Users(name, age, location)
db.collection('Users').insertOne({
name: 'Andrew',
age: 25,
location: 'Philadelphia'
}
The next argument we want it to pass in is our callback function,
which is going to get called with the error object as well as the
results. Inside of the callback function itself, we're going to first
handle the error. If there was an error, we're going to go ahead and
log it to the screen. I'm going to return console.log, and then we can
put the message: Unable to insert user. Then, I'll add the error
argument as the second argument for console.log. Next up, we can
add our success case code. If things go well, all I'm going to do is
use console.log to print result.ops to the screen. This is going to show us
all of the records that were inserted:
//Insert new doc into Users(name, age, location)
db.collection('Users').insertOne({
name: 'Andrew',
age: 25,
location: 'Philadelphia'
}, (err, result) => {
if(err) {
return console.log('Unable to insert user', err);
}
console.log(result.ops);
});
We can now go ahead and rerun the file inside of the Terminal
using the up arrow key and the enter key:
We get our array of inserted documents, and we just have one. The
name, age, and location properties all come from us, and the _id property
comes from MongoDB.
Next up, I want you to verify that it was indeed inserted by viewing
it in Robomongo. In general, when you add a new collection or a
new database, you can just right-click the connection itself, click
Refresh, and then you should be able to see everything that was
added:
As shown in the preceding screenshot, we have our Users collection.
I can view the documents for Users. We get our one document with
the name set to Andrew, age set to 25, and location set to
Philadelphia. With this in place, we are now done. We've been able
to connect to our MongoDB database using Node.js, and we've also
learned how to insert documents using this mongo-native library.
In the next section, we're going to take an in-depth look at
ObjectIds, exploring exactly what they are and why they're useful.
The ObjectId
Now that you have inserted some documents into your MongoDB
collections, I want to take a moment to talk about the _id property in
the context of MongoDB because it's a little different than the IDs
that you're probably used to if you've used other database systems,
like Postgres or MySQL.
The _id property in the context
of MongoDB
To kick off our discussion of the _id property, let's go ahead and
rerun the mongodb-connect file. This is going to insert a new document
into the Users collection, like we've defined in the db.collection line.
I'm going to go ahead and do that by running the file through the
node. It's in the playground folder, and the file itself is called mongodb-
connect.js:
node playground/mongodb-connect.js
I'm going to run the command, and we're going to print out the
document that got inserted:
As we've seen in the past, we get our three attributes as well as the
one added by Mongo.
The first thing you'll notice about this is that it is not an auto
incrementing integer, kind of like it is for Postgres or MySQL,
where the first record has an ID of 1 and the second one has an ID
of 2. Mongo does not use this approach. Mongo was designed to
scale out really easily. Scaling out means that you can add on more
database servers to handle that extra load.
Imagine you have a web app that gets about 200 users a day and
your current servers are ready for that traffic. Then, you get picked
up by some news outlet and 10,000 people flood your site. With
MongoDB, it's really easy to kick up new database servers to handle
that extra load. When we use a randomly generated ID, we don't
need to constantly communicate with the other database servers to
check what the highest incrementing value is. Is it 7? Is it 17? It
doesn't really matter; we're simply going to generate a new random
ObjectId and use that for the document's unique identifier.
Now, the ObjectId itself is made up of a few different things. It's a
12-byte value. The first four bytes are a timestamp; we'll talk about
that later. That means that we have a timestamp built into the data
that refers to the moment in time the ID was created. This means
that in our documents, we don't need to have a createdAt field; it's
already encoded in the ID.
The next three bytes are machine identifiers. This means that if two
computers generate ObjectIds, their machine ID is going to be
different, and this is going to ensure that the ID is unique. Next up,
we have two bytes, the process ID, which is just another way to
create a unique identifier. Last up, we have a 3-byte counter. This is
similar to what MySQL would do. This is only 3 bytes of the ID. As
we have already mentioned, we have a timestamp which is going to
be unique; a machine identifier; a process ID; and lastly, just a
random value. That is what makes up an ObjectId.
The ObjectId is the default value for _id. If nothing is provided, you
can indeed do whatever you like with that property. For example,
inside of the mongodb-connect file, I can specify an _id property. I'm
going to give it a value, so let's go with 123; add a comma at the end;
and that is perfectly legal:
db.collection('Users').insertOne({
_id: 123,
name: 'Andrew',
age: 25,
location: 'Philadelphia'
}
We can save the file, and rerun the script using the up arrow key
and the enter key:
We get our record, where the _id property is 123. The ObjectId is the
default way MongoDB creates IDs, but you can do anything you like
for ID creation. Inside of Robomongo, we can give our Users
collection a refresh, and we get our documents:
We have the one we created in the previous section and the two we
just made now, all with a unique identifier. This is why unique IDs
are really important. In this example, we have three properties:
name, age and location, and they're the same for all the records.
This is a reasonable thing to do. Imagine two people need to do the
same thing, like buy groceries. That string alone is not going to be
enough to uniquely identify a Todo. ObjectIds, on the other hand,
are going to be unique, and that is what we're going to use to
associated things like Todos with things like Users.
Next up, I want to take a look at some things we can do with the ID
inside of our code. As I mentioned earlier, a timestamp is embedded
inside of here, and we can actually pull that out. Inside of Atom,
what we're going to do is remove the _id property. The timestamp is
only going to be available when you're using the ObjectId. Then,
inside of our callback, we can go ahead and print the timestamp to
the screen.
db.collection('Users').insertOne({
name: 'Andrew',
age: 25,
location: 'Philadelphia'
}, (err, result) => {
if(err) {
return console.log('Unable to insert user', err);
}
console.log(result.ops);
});
If you remember, result.ops is an array of all the documents that got
inserted. We're only inserting one, so I'm going to access the first
item in the array, and then we're going to access the _id property.
This is going to do exactly what you might think:
console.log(result.ops[0]._id);
If we save the file and rerun the script over from the Terminal, all
we get is the ObjectId printing to the screen:
Now though, we can call a method on the _id property.
Calling the .getTimestamp
function
What we're going to call is .getTimestamp. The getTimestamp is a function,
but it doesn't take any arguments. It simply returns the timestamp
that the ObjectId was created at:
console.log(result.ops[0]._id.getTimestamp());
Now, if we go ahead and rerun our program, we get a timestamp:
In the preceding screenshot, I can see that the ObjectId was created
on February 16th 2016 at 08:41 Z, so this timestamp is indeed
correct. This is a fantastic way to figure out exactly when a
document was created.
Now, we don't have to rely on MongoDB to create our ObjectIds.
Inside of the MongoDB library, they actually give us a function we
can run to make an ObjectId whenever we like. For the moment,
let's go ahead and comment out our call to insert one.
At the very top of the file, we're going to change our import
statement to load in something new off of MongoDB, and we're
going to do this using an ES6 feature known as object destructuring.
Let's take a quick second to talk about that before we actually go
ahead and use it.
Using object destructuring ES6
Object destructuring lets you pull out properties from an object in
order to create variables. This means that if we have an object called
user and it's set equal to an object with a name property set to andrew
and an age property set to 25, as shown in the following code:
const MongoClient = require('mongodb').MongoClient;
var user = {name: 'andrew', age: 25};
We can easily pull out one of these into a variable. Let's say, for
example, we want to grab name and create a name variable. To do that
using object destructuring in ES6, we're going to make a variable
and then we're going to wrap it inside of curly braces. We're going
to provide the name we want to pull out; this is also going to be the
variable name. Then, we're going to set it equal to whatever object
we want to destructure. In this case, that is the user object:
var user = {name: 'andrew', age: 25};
var {name} = user;
We have successfully destructured the user object, pulling off the name
property, creating a new name variable, and setting it equal to
whatever the value is. This means I can use the console.log statement
to print name to the screen:
var user = {name: 'andrew', age: 25};
var {name} = user;
console.log(name);
I'm going to rerun the script and we get andrew, which is exactly what
you'd expect because that is the value of the name property:
ES6 destructuring is a fantastic way to make new variables from an
object's properties. I'm going to go ahead and delete this example,
and at the top of the code, we're going to change our require
statement so that it uses destructuring.
Before we add anything new, let's go ahead and take the
MongoClient statement and switch it to destructuring; then, we'll
worry about grabbing that new thing that's going to let us make
ObjectIds. I'm going to copy and paste the line and comment out
the old one so we have it for reference.
// const MongoClient = require('mongodb').MongoClient;
const MongoClient = require('mongodb').MongoClient;
What we're going to do is remove our .MongoClient call after require.
There's no need to pull off that attribute because we're going to be
using destructuring instead. That means over here we can use
destructuring, which requires us to add our curly braces, and we
can pull off any property from the MongoDB library.
const {MongoClient} = require('mongodb');
In this case, the only property we had was MongoClient. This creates a
variable called MongoClient, setting it equal to the MongoClient property of
require('mongodb'), which is exactly what we did in the previous require
statement.
Creating a new instance of
objectID
Now that we have some destructuring in place, we can easily pull
more things off of MongoDB. We can add a comma and specify
something else we want to pull off. In this case, we're going to pull
off uppercase, ObjectID.
const {MongoClient, ObjectID} = require('mongodb');
This ObjectID constructor function lets us make new ObjectIds on the
fly. We can do anything we like with them. Even if we're not using
MongoDB as our database, there is some value in creating and
using ObjectIds to uniquely identify things. Next, we can make a
new ObjectId by first creating a variable. I'll call it obj, and we'll set
it equal to new ObjectID, calling it as a function:
const {MongoClient, ObjectID} = require('mongodb');
var obj = new ObjectID();
Using the new keyword, we can create a new instance of ObjectID. Next
up, we can go ahead and log that to the screen using console.log(obj).
This is a regular ObjectId:
console.log(obj);
If we rerun the file over from the Terminal, we get exactly what
you'd expect:
We get an ObjectId-looking thing. If I rerun it again, we get a new
one; they are both unique:
Using this technique, we can incorporate ObjectIds anywhere we
like. We could even generate our own, setting them as the _id
property for our documents, although I find it much easier to let
MongoDB handle that heavy lifting for us. I'm going to go ahead
and remove the following two lines since we won't actually be using
this code in the script:
var obj = new ObjectID();
console.log(obj);
We have learned a bit about ObjectIds, what they are, and why
they're useful. In the following sections, we're going to be taking a
look at other ways we can work with MongoDB. We'll learn how to
read, remove, and update our documents.
Fetching data
Now that you know how to insert data into your database, let's go
ahead and talk about how we can fetch data out of it. We're going to
be using this technique in the Todo API. People are going to want to
populate a list of all the Todo items they need, and they might want
to fetch the details about an individual Todo item. All of this is
going to require that we can query the MongoDB database.
Fetching todos in Robomongo
file
Now, we're going to create a new file based off of mongodb-connect. In
this new file, instead of inserting records, we'll fetch records from
the database. I'm going to create a duplicate, calling this new file
mongodb-find, because find is the method we're going to use to query
that database. Next, we can go ahead and remove all of the
commented-out code that currently inserts records. Let's get started
by trying to fetch all of the Todos out of our Todos collection. Now,
if I head over to Robomongo and open up the Todos collection, we
have just one record:
In order to make this querying a little more interesting, we're going
to go ahead and add a second one. Right in the Robomongo
window, I can click Insert Document. Robomongo can delete,
insert, update, and read all of your documents, and this makes it a
fantastic tool for debugging. We can add a new document on the fly,
with a text property equal to Walk the dog, and we can also tack on a
completed value. I'm going to set completed equal to false:
{
text : "Walk the dog",
completed : false
}
Now by default, we're not going to provide an _id prop. This is going
to let MongoDB automatically generate that ObjectId, and right
here we have our two Todos:
With this in place, let's go ahead and run our first query inside of
Atom.
The find method
In Atom, what we're going to do is access the collection, just like we
did inside of the mongodb-connect file using db.collection, passing in the
collection name as the string. This collection is going to be the Todos
collection. Now, we're going to go ahead and use a method available
on collections called find. By default, we can call find with no
arguments:
db.collection('Todos').find();
This means we're not providing a query, so we're not saying we
want to fetch all Todos that are completed or not completed. We're
just saying we want to fetch all Todos: everything, regardless of its
values. Now, calling find is only the first step. find returns a
MongoDB cursor, and this cursor is not the actual documents
themselves. There could be a couple of thousand, and that would be
really inefficient. It's actually a pointer to those documents, and the
cursor has a ton of methods. We can use those methods to get our
documents.
One of the most common cursor methods we're going to be using is
.toArray. It does exactly what you think it does. Instead of having a
cursor, we have an array of the documents. This means we have an
array of objects. They have ID properties, text properties, and
completed properties. This toArray method gets us exactly what we
want back, which is the documents. toArray returns a promise. This
means we can tack on a then call, we can add our callback, and when
things go right, we can do something like print those documents to
the screen.
db.collection('Todos').find().toArray().then((docs) => {
});
We're going to get the documents as the first and only argument
here, and we can also add an error handler. We'll get passed an
error argument, and we can simply print something to the screen
like console.log(Unable to fetch todos); as the second argument, we'll pass
in the err object:
db.collection('Todos').find().toArray().then((docs) => {
}, (err) => {
console.log('Unable to fetch todos', err);
});
Now, for the success case, what we're going to do is print the
documents to the screen. I'm going to go ahead and use console.log to
print a little message, Todos, and then I'll call console.log again. This
time, we'll be using the JSON.stringify technique. I'll be passing in the
documents, undefined for our filter function and 2 for our spacing.
db.collection('Todos').find().toArray().then((docs) => {
console.log('Todos');
console.log(JSON.stringify(docs, undefined, 2));
}, (err) => {
console.log('Unable to fetch todos', err);
});
We now have a script that is capable of fetching the documents,
converting them into an array, and printing them to the screen.
Now, for the time being, I'm going to comment out the db.close
method. Currently, that would interfere with our previous bit of
code. Our final code would look as follows:
//const MongoClient = require('mongodb').MongoClient;
const {MongoClient, ObjectID} = require('mongodb');
MongoClient.connect('mongodb://localhost:27017/TodoApp', (err, client) => {
if(err){
console.log('Unable to connect to MongoDB server');
}
console.log('Connected to MongoDB server');
const db = client.db('TodoApp');
db.collection('Todos').find().toArray().then((docs) => {
console.log('Todos');
console.log(JSON.stringify(docs, undefined, 2));
}, (err) => {
console.log('Unable to fetch todos', err);
});
//client.close();
});
Save the file and run it from the Terminal. Inside of the Terminal,
I'm going to go ahead and run our script. Obviously, since we
connected to the database with Robomongo, it is running
somewhere; it's running in this other tab. In the other tab, I can run
the script. We're going to run it through node; it's in the playground
folder, and the file itself is called mongodb-find.js:
node playground/mongodb-find.js
When I execute this file, we're going to get our results:
We have our Todos array with our two documents. We have our _id,
our text properties, and our completed Boolean values. We now have a
way to query our data right inside of Node.js. Now, this is a very
basic query. We fetch everything in the Todos array, regardless of
whether or not it has certain values.
Writing a query to fetch certain
values
In order to query based on certain values, let's go ahead and switch
up our Todos. Currently, both of them have a completed value equal to
false. Let's go ahead and change the Walk the dog completed value to
true so we can try to just query items that aren't completed. Over in
Robomongo, I'm going to right-click the document and click Edit
Document, and there we can edit the values. I'm going to change the
completed value from false to true, and then I can save the record:
Inside of the Terminal, I can rerun the script to prove that it has
changed. I'm going to shut down the script by running control + C,
and then I can rerun it:
As shown in the preceding screenshot, we have our two Todos, one
with a completed value of false and one with a completed value of true. By
default, a Todo app is probably only going to show you the Todos
collection you haven't completed. The ones you have completed,
like Walk the dog, will probably be hidden, although they could be
accessible if you clicked a button like Show all Todos. Let's go ahead
and write a query that just fetches the Todos collection that have a
completed status set to false.
Writing a query to fetch
completed todos
To get this done, inside of Atom, we're going to make a change to
how we call find. Instead of passing in 0 arguments, we're going to
pass in 1. This is what's known as our query. We can start specifying
how we want to query the Todos collection. For example, maybe we
want to query only Todos that have a completed value equal to false. All
we have to do to query by value is set up the key-value pairs, as
shown here:
db.collection('Todos').find({completed: false}).toArray().then((docs) => {
If I rerun our script over in the Terminal after shutting it down, we
get just our one Todo item:
We have our item with the text equal to Something to do. It has a completed
status of false, so it shows up. Our other Todo with a text property of
Walk the dog is not showing up because that one has been completed.
It doesn't match the query, so MongoDB does not return it. This is
going to come in handy as we start querying our documents based
off of completed values, text properties, or IDs. Let's take a quick
moment to look at how we can query one of our Todos by ID.
Qureying todos by id
The first thing we need to do is remove everything from our query
object; we no longer want to query by the completed value. Instead,
we're going to query by the _id property.
Now, in order to illustrate this, I'm going to grab the ID of the Todo
with the completed value of false from the Terminal. I'm going to copy
it using command + C. If you're on Windows or Linux, you might
need to right-click after highlighting the ID, and click Copy text.
Now that I have the text inside of the clipboard, I can head over to
the query itself. Now, if we try to add the ID like this:
db.collection('Todos').find({_id: ''}).toArray().then((docs) => {
It is not going to work as expected because what we have inside of
the ID property is not a string. It's an ObjectId, which means that
we need to use the ObjectID constructor function that we imported
previously in order to create an ObjectId for the query.
To illustrate how that's going to happen, I'm going to go ahead and
indent our object. This is going to make it a little easier to read and
edit.
db.collection('Todos').find({
_id: '5a867e78c3a2d60bef433b06'
}).toArray().then((docs) => {
Now, I'm going to remove the string and call new ObjectID. The new
ObjectID constructor does take an argument: the ID, in this case, we
have it stored as a string. This is going to work as expected.
db.collection('Todos').find({
_id: new ObjectID('5a867e78c3a2d60bef433b06');
})
What we're doing here is we're querying the Todos collection,
looking for any records that have an _id property equal to the ID we
have. Now, I can go ahead and save this file, give things a refresh by
running the script again, and we'll get the exact same Todo:
I can go ahead and change it for the Walk the dog Todo by copying the
string value, pasting that inside of the ObjectID constructor
function, and rerunning the script. When I do this, I get the Walk the
dog Todo returned because that was the ObjectId I queried.
Now, querying in this fashion is one of the ways we'll be using find,
but there are other methods other than toArray that are available on
our cursors. We can explore other ones by heading over to the docs
for the native driver. Inside of Chrome, have the MongoDB docs
pulled up—these are the docs I showed you how to access in the
previous chapter—and on the left-hand side, we have the Cursor
section.
If you click that, we can view a list of all the methods available to us
on that cursor:
This is what comes back from find. At the very bottom of the list, we
have our toArray method. The one that we're going to look at right
now is called count. From previous, you can go ahead and click
count; it's going to bring you to the documentation; the
documentation for the native driver is actually really good. There is
a complete list of all the arguments that you can provide. Some of
them are optional, some of them are required, and there is usually a
real-world example. Next, we can figure out exactly how to use count.
Implementing the count
method
Now, we're going to go ahead and implement count over inside of
Atom. What I'm going to do is take the current query, copy it to the
clipboard, and then comment it out. I'm going to go ahead and
replace our call to toArray with a call to count. Let's go ahead and
remove the query that we pass in to find. What we're going to do
here is count up all of the Todos in the Todos collection. Instead of
having a call to toArray, we're going to have a call to count instead.
db.collection('Todos').find({}).count().then((count) => {
As you saw inside of the examples for count, they call count like
this: calling count, passing in a callback function that gets called
with an error, or the actual count. You can also have a promise as a
way to access that data, which is exactly what we did with toArray. In
our case, instead of passing a callback function like this, we're going
to use the promise instead. We already have the promise set up. All
we need to do to fix this is change docs to count, and then we're going
to remove the console.log caller where we print the docs to the screen.
Right after we print Todos, we're going to print Todos count, with a
colon passing in the value.
db.collection('Todos').find({}).count().then((count) => {
console.log('Todos count:');
}, (err) => {
console.log('Unable to fetch todos', err);
});
This is not a template string, but I am going to go ahead and swap it
out with one, replacing the quotes with `. Now, I can pass in the
count.
db.collection('Todos').find({}).count().then((count) => {
console.log(`Todos count: ${count}`);
}, (err) => {
console.log('Unable to fetch todos', err);
});
Now that we have this in place, we have a way to count up all of the
Todos in the Todos collection. Inside the Terminal, I'm going to go
ahead and shut down our previous script and rerun it:
We get Todos count too, which is correct. The cursor that we have, a
call to find, returns everything in the Todos collection. If you count
all of that up, you're going to get those two Todo items.
Once again, these are count and toArray; they're just a subset of all of
the awesome methods you have available to you. We will be using
other methods, whether it be the MongoDB native driver or, as
you'll see later, the library Mongoose, but for now let's go ahead and
do a challenge, given what you know.
Querying users collection
To get started, let's head into Robomongo, open up the Users
collection, and take a look at all the documents we have inside of
there. We currently have five. If you don't have the exact same
number or yours are a little different, that's fine. I'm going to
highlight them, right-click them, and click Expand Recursively. This
is going to show me all of the key-value pairs for each document:
Currently, aside from the ID, they're all identical. The name's
Andrew, the age is 25, and the location is Philadelphia. I'm going to
tweak the name property for two of them. I'm going to right-click
the first document, and change the name to something like Jen.
Then, I'll go ahead and do the same thing for the second document.
I'm going to edit that document and change the name from Andrew to
Mike. Now I have one document with a name of Jen, one with Mike, and
three with Andrew.
We're going to query our users, looking for all of the users with the
name equal to the name that you provided in the script. In this case,
I'm going to try to query for all documents in the Users collection
where the name is Andrew. Then, I'm going to print them into the
screen, and I will expect to get three back. The two with the names
Jen and Mike should not show up.
The first thing we need to do is fetch from the collection. This is
going to be the Users collection as opposed to the Todos collection
we've used in this chapter. In the db.collection, we're looking for the
Users collection and now we're going to go ahead and call find,
passing in our query. We want a query, fetching all documents
where the name is equal to the string Andrew.
db.collection('Users').find({name: 'Andrew'})
This is going to return the cursor. In order to actually get the
documents, we have to call toArray. We now have a promise; we can
attach a then call onto toArray to do something with the docs. The
documents are going to come back as the first argument in our
success handler, and right inside of the function itself we can print
the docs to the screen. I'm going to go ahead and use
console.log(JSON.stringify()), passing in our three classic arguments: the
object itself, docs, undefined, and 2 for formatting:
db.collection('Users').find({name: 'Andrew'}).toArray().then((docs) => {
console.log(JSON.stringify(docs, undefined, 2));
});
With this in place, we have now done. We have a query, and it
should work. We can test it by running it from the Terminal. Inside
the Terminal, I'm going to go ahead and shut down the previous
connection and rerun the script:
When I do this, I get my three documents back. All of them have a
name equal to Andrew, which is correct because of the query we set up.
Notice the documents with a name equal to Mike or Jen are nowhere
to be found.
We now know how to insert and query data from the database. Up
next, we're going to take a look at how we can remove and update
documents.
Setting up the repo
Before we go any further, I do want to add version control to this
project. In this section, we're going to create a new repo locally,
make a new GitHub repository, and push our code to that GitHub
repository. If you're already familiar with Git or GitHub, you can go
ahead and do that on your own; you don't need to go through this
section. If you're new to Git and it doesn't make sense just yet, that's
also fine. Simply follow along, and we'll go through the whole
process.
This section is going to be really simple; nothing MongoDB- related
here. To get started, I am going to go ahead and initialize a new Git
repository from the Terminal by using git init. This is going to
initialize a new repository, and I can always run git status like this to
take a look at the files that are untracked:
Here we have our playground folder, which we want to add under
version control, and we have package.json. We also have node_modules. We
do not want to track this directory. This contains all of our npm
libraries. To ignore node_modules, in Atom we're going to make the
.gitignore file in the root of our project. If you remember, this lets you
specify files and folders that you want to leave out of your version
control. I'm going to create a new file called .gitignore. In order to
ignore the node_modules directory, all we have to do is type it exactly as
it's shown here:
node_modules/
I'm going to save the file and rerun git status from the Terminal. We
get the .gitignore folder showing up, and the node_modules folder is
nowhere in sight:
The next thing we're going to do is make our first commit, using two
commands. First up, I'm going to use git add . to add everything to
the next commit. Then, I can make the commit using git commit with
the -m flag. A good message for this commit would be Init commit:
git add .
git commit -m 'Init commit'
Now before we go, I do want to make a GitHub repository and get
this code up there. This is going to require me to open up the
browser and go to github.com. Once you're logged in we can make a
new repo. I'm going to make a new repo and give it a name:
I'm going to go with node-course-2-todo-api. You can name yours
something else if you wish. I'm going to go with this one to keep the
course files organized. Now I can go ahead and create this
repository, and as you may recall, GitHub actually gives us a few
helpful commands:
In this case, we're pushing an existing repository from the
command line. We already went through the steps of initializing the
repository, adding our files and making our first commit. That
means I can take the following two lines, copy them, head over to
the Terminal, and paste them in:
git remote add origin https://github.com/garygreig/node-course-2-todo-api.git
git push -u origin master
You might need to do these one at a time, depending on your
operating system. On the Mac, when I try to paste in multiple
commands it's going to run all but the last, and then I just have to
hit enter to run the last one. Take a moment to knock that out for
your operating system. You might need to run it as one command,
or you might be able to paste it all in and hit enter. Either way, what
we have here is our code pushed up to GitHub. I can prove that it's
pushed up by refreshing the repository page:
Right there we have all of our source code, the .gitignore file,
package.json, and we have our playground directory with our MongoDB
scripts.
That's it for this section. We'll explore how to delete data from a
MongoDB collection in the next section.
Deleting documents
In this section, you're going to learn how to delete documents from
your MongoDB collections. Before we get into that, in order to
explore the methods that let us delete multiple documents or just
one, we want to create a few more Todos. Currently, the Todos
collection only has two items, and we're going to need a few more in
order to play around with all these methods involving deletion.
Now, I do have two. I'm going to go ahead and create a third by
right-clicking and then going to Insert Document.... We'll make a
new document with a text property equal to something like Eat lunch,
and we'll set completed equal to false:
{
text: 'Eat lunch',
completed: false
}
Now before we save this, I am going to copy it to the clipboard.
We're going to create a few duplicate Todos so we can see how we
can delete items based off of specific criteria. In this case, we're
going to be deleting multiple Todos with the same text value. I'm
going to copy that to the clipboard, click Save, and then I'll create
two more with the exact same structure. Now we have three Todos
that are identical except for the ID, and we have two that have
unique text properties:
Let's go ahead and move into Atom and start writing some code.
Exploring methods to delete
data
I'm going to duplicate the mongodb-find file, creating a brand-new file
called mongodb-delete.js. In here, we'll explore the methods for deleting
data. I'm also going to remove all of the queries that we set up in the
previous section. I am going to keep the db.close method commented
out, as once again we don't want to close the connection just yet; it's
going to interfere with these statements we're about to write.
Now, there are three methods that we'll be using in order to remove
data.
The first one is going to be deleteMany. The deleteMany method
will let us target many documents and remove them.
We'll also be using deleteOne, which targets one document and
removes it.
And finally, we'll be using findOneAndDelete. The findOneAndDelete
method lets you remove an individual item and it also
returns those values. Imagine I want to delete a Todo. I
delete the Todo, but I also get the Todo object back so I can
tell the user exactly which one got deleted. This is a really
useful method.
The deleteMany method
Now, we're going to start off with deleteMany, and we're going to target
those duplicates we just created. The goal in this section, is to delete
every single Todo inside of the Todos collection that has a text
property equal to Eat lunch. Currently, there are three out of five that
fit that criteria.
In Atom, we can go ahead and kick things off by doing db.collection.
This is going to let us target our Todos collection. Now, we can go
ahead and use the collection method deleteMany, passing in the
arguments. In this case, the only argument we need is our object,
and this object is just like the object we passed to find. With this, we
can target our Todos. In this case, we're going to delete every Todo
where the text equals Eat lunch.
//deleteMany
db.collection('Todos').deleteMany({text: 'Eat lunch'});
We didn't use any punctuation in RoboMongo, so we're also going
to avoid punctuation over in Atom; it needs to be exactly the same.
Now that we have this in place, we could go ahead and tack on a then
call to do something when it either succeeds or fails. For now, we'll
just add a success case. We are going to get a result argument
passed back to the callback, and we can print that to the
console.log(result) screen, and we'll take a look at exactly what is in
this result object a bit later.
//deleteMany
db.collection('Todos').deleteMany({text: 'Eat lunch'}).then((result) => {
console.log(result);
});
With this in place, we now have a script that deletes all Todos where
the text value is Eat lunch. Let's go ahead and run it, and see exactly
what happens. In the Terminal, I'm going to run this file. It's in the
playground folder, and we just called it mongodb-delete.js:
node playground/mongodb-delete.js
Now when I run it, we get a lot of output:
A really important piece of output, the only important piece
actually, is up at the very top. If you scroll to the top, what you're
going to see is this result object. We get ok set to 1, which means
things did go as expected, and we get n set to 3. n is the number of
records that were deleted. In this case, we had three Todos that
match that criteria, so three Todos were deleted. This is how you
can target and delete many Todos.
The deleteOne Method
Now, aside from deleteMany, we have deleteOne, and deleteOne works
exactly the same as deleteMany, only it deletes the first item it sees that
matches the criteria and then it stops.
To illustrate exactly how this works, we're going to create two items
inside of our collection. If I give things a refresh, you will see that
we now only have two documents:
These are the ones we started with. I'm going to insert documents
again using the same data that's already in my clipboard. This time
we'll just make two document, two that are identical.
The deleteOne method
The goal here is to use deleteOne to delete the document where the
text equals Eat lunch, but since we're using deleteOne and not deleteMany,
one of these should stay around and one of them should go away.
Back inside of Atom, we can go ahead and get started by calling
db.collection with the collection name we want to target. In this case
it's Todos again, and we're going to use deleteOne. The deleteOne method
takes that same criteria. We're going to target documents where text
equals Eat lunch.
This time though, instead of deleting multiple documents we're just
going to delete the one, and we are still going to get that same exact
result. To prove it, I'll just print to the screen like we did previously
with console.log(result):
//deleteOne
db.collection('Todos').deleteOne({text: 'Eat lunch'}).then((result) => {
console.log(result);
});
With this in place, we can now rerun our script and see what
happens. In the Terminal, I'm going to shut down our current
connection and rerun it:
We get a similar-looking object, a bunch of junk we don't really care
about, but once again if we scroll to the top we have a result object,
where ok is 1 and the number of deleted documents is also 1. Even
though multiple documents did pass this criteria it only deleted the
first one, and we can prove that by going over to Robomongo, right-
clicking up above, and viewing the documents again. This time
around, we have three Todos.
We do still have one of the Todos with the Eat lunch text:
And now that we know how to use these two methods, I want to
take a look at my favorite method. This is findOneAndDelete.
The findOneAndDelete method
Most of the time, when I'm deleting a document, I only have the ID.
This means that I don't exactly know what the text is or the
completed status, and that can be really useful depending on your
user interface. For example, if I delete a Todo, maybe I want to
show that next, saying You deleted the Todo that says Eat lunch,
with a little undo button in case they didn't mean to take that
action. Getting the data back as well as deleting it can be really
useful.
In order to explore findOneAndDelete, we're going to once again target
the Todo where the text equals Eat lunch. I'm going to go ahead and
comment out deleteOne, and next we can get started by accessing the
appropriate collection. The method is called findOneAndDelete. The
findOneAndDelete method takes a very similar set of arguments. The
only thing we need to pass in is the query. This is going to be
identical to the ones we have in the previous screenshot. This time
though, let's go ahead and target Todos that had a completed value set
to false.
Now there are two Todos that fit this query, but once again we're
using a findOne method, which means it's only going to target the first
one it sees, the one with a text property of Something to do. Back in
Atom, we can get this done by targeting Todos where completed equals
false. Now, instead of getting back a result object with an ok property
and an n property, the findOneAndDelete method actually gets that
document back. This means we can tack on a then call, we can get
our result, and we can print it to the screen once again with
console.log(result):
//findOneAndDelete
db.collection('Todos').findOneAndDelete({completed: false}).then((result) => {
console.log(result);
});
Now that we have this in place, let's test things out over in the
Terminal. In the Terminal, I'm going to shut down the script and
start it up again:
We get a few different things in our result object. We do get an ok set
to 1, letting us know things went as planned. We have a
lastErrorObject; we'll talk about that in just a second; and we have our
value object. This is the actual document we deleted. This is why the
findOneAndDelete method is super handy. It gets that document back as
well as deleting it.
Now in this particular case, the lastErrorObject, once again just has our
n property, and we can see the number of Todos that were deleted.
There is other information that could potentially be in lastErrorObject,
but that's only going to happen when we use other methods, so we'll
look at that when the time comes. For now, when you delete a Todo,
we just get the number back.
With this in place, we now have three different ways we can target
our MongoDB documents and remove them.
Using the deleteMany and
findOneAndDelete methods
We're going to go ahead and go over a quick challenge to test your
skills. Inside of Robomongo, we can look at the data we have in the
Users collection. I'm going to open it up, highlight all the data, and
expand it recursively so we can view it:
We have the name Jen; we have Mike; we have Andrew, Andrew
and Andrew. This is perfect data. Yours might look a little different,
but the goal is to use two methods. First up, look for any duplicates,
anything that has a name set to the name of another document. In
this case, I have three documents where the name is Andrew. What
I want to do is use deleteMany to target all of these documents and
remove them. I also want to use findOneAndDelete to delete another
document; it doesn't matter which one. And I want you to delete it
by ID.
In the end, both statements should show their effect over inside of
Robomongo. When I'm done, I'm hoping to see these three
documents deleted. They all have the name Andrew, and I'm hoping
to see the document where the name Mike is deleted, because I'm
going to target this one by ID in my findOneAndDelete method call.
First up, I'm going to write my scripts, one for deleting users where
the name is Andrew and one for deleting the document with the ID. In
order to grab the ID, I am going to go ahead and edit it and simply
grab the text inside of quotes, and then I can cancel the update and
move into Atom.
Removing duplicate
documents
First up, we're going to go ahead and try to remove the duplicate
users, and I'm going to do this by using db.collection. We're going to
target the Users collection, and in this particular case, we're going to
be using the deleteMany method. Here, we're going to try to delete all
of the users where the name property equals Andrew.
db.collection('Users').deleteMany({name: 'Andrew'});
Now I could tack on a then call to check for success or errors, or I
could just leave it like this, which is what I'm going to do. If you use
a callback or the promise then method, that is perfectly fine. As long
as the deletion happens, you're good to go.
Targeting the documents using
ID
Next up, I'm going to write the other statement. We're going to
target the Users collection once again. Now, we're going to go ahead
and use the findOneAndDelete method. In this particular case, I am going
to be deleting the Todo where the _id equals the ObjectId I have
copied to the clipboard, which means I need to create a new ObjectID,
and I also need to go ahead and pass in the value from the clipboard
inside of quotes.
db.collection('Users').deleteMany({name: 'Andrew'});
db.collection('Users').findOneAndDelete({
_id: new ObjectID("5a86978929ed740ca87e5c31")
})
Either single or double would work. Make sure the capitalization of
ObjectID is identical to what you have defined, otherwise this creation
will not happen.
Now that we have the ID created and passed in as the _id property,
we can go ahead and tack on a then callback. Since I'm using
findOneAndDelete, I am going to print that document to the screen.
Right here I'll get my argument, results, and I'm going to print it to
the screen using our pretty- printing
method,console.log(JSON.stringify()), passing in those three arguments,
the results, undefined, and the spacing, which I'm going to use as 2.
db.collection('Users').deleteMany({name: 'Andrew'});
db.collection('Users').findOneAndDelete({
_id: new ObjectID("5a86978929ed740ca87e5c31")
}).then((results) => {
console.log(JSON.stringify(results, undefined, 2));
});
With this in place, we are now ready to go.
Running the findOneAndDelete
and deleteMany statements
Let's go ahead and comment out findOneAndDelete first. We'll run the
deleteMany statement. Over in the Terminal, I can shut down the
current connection, start it up again, and if we go over to
Robomongo, we should see that those three documents were
deleted. I'm going to right-click on Users and view the documents:
We just get the two documents back. Anything where the name was
Andrew is now removed, which means our statement worked as
expected, and this is fantastic.
Next up, we can run our findOneAndDelete statement. In this case, we're
expecting that that one document, the one where the name equals Mike,
gets removed. I'm going to go ahead and make sure I save the file.
Once I do, I can move into the Terminal and rerun the script. This
time around, we get the document back where the name is Mike. We did
target the correct one, and it does appear that one item was deleted:
I can always go ahead and verify this by refreshing the collection
inside of Robomongo:
I get my collection with just one document inside of it. We are now
done. We know how to delete documents from our MongoDB
collections; we can delete multiple documents; we can target just
one, or we can target one and get its value back.
Making commit for the deleting
documents methods
Before we go, let's go ahead and make a commit, pushing it up to
GitHub. In the Terminal, I can shut down the script and I can run
git status to see what files we have untracked. Here, we have our
mongodb-delete file. I can add it using git add . and then I can commit,
using git commit with the -m flag. Here, I can go ahead and provide a
commit message, which is going to be Add delete script:
git commit -m 'Add delete script'
I'm going to make that commit and I am going to push it up to
GitHub using git push, which will default to the origin remote. When
you only have one remote, the first one is going to be called origin.
This is the default name, just like master is the default branch. With
this in place, we are now done. Our code is up on GitHub. The topic
of the next section is updating, which is where you're going to learn
how to update documents inside of a collection.
Updating data
You know how to insert, delete, and fetch documents out of
MongoDB. In this section, you're going to learn how to update
documents in your MongoDB collections. To kick things off, as
usual, we're going to duplicate the last script we wrote, and we'll
update it for this section.
I'm going to duplicate the mongodb-delete file, renaming it to mongodb-
update.js, and this is where we'll write our update statements. I'm
also going to delete all of the statements we wrote, which is the
deleted data. Now that we have this in place, we can explore the one
method we'll be looking at in this section. This one is called
findOneAndUpdate. It's kind of similar to findOneAndDelete. It lets us update
an item and get the new document back. So if I update a Todo, set it
as completed equal to true, I will get that document back in the
response. Now in order to get started, we're going to be updating
one of the items that we have inside of our Todos collection. If I
view the documents, we currently have two. The goal here is going
to be to update the second item, the one where text equals Eat lunch.
We're going to try to set the completed value to true, which would be a
pretty common action.
If I check off a Todo item, we want to toggle that completed Boolean
value. Back inside of Atom, we're going to kick things off by
accessing the appropriate collection. That'll be db.collection. The
collection name is Todos, and the method we'll be using is
findOneAndUpdate. Now, findOneAndUpdate is going to take the most
arguments we've used so far, so let's go ahead and look up the
documentation for it for future reference.
Over inside of Chrome, we currently have the Cursor tab open. This
is where we have the count method defined. If we scroll next the
Cursor tab, we have our other tabs. The one we're looking for is
Collection. Now, inside of the Collection section, we have our typedefs
and our methods. We're looking at methods here, so if I scroll
down, we should be able to find findOneAndUpdate and click it. Now,
findOneAndUpdate takes quite a few arguments. The first one is the filter.
The update argument lets us target the document we want to update.
Maybe we have the text, or most likely we have the ID of the
document. Next up is the actual updates we want to make. We don't
want to update the ID, we just want to filter by ID. In this case, the
updates are going to be updating the completed Boolean. Then we
have some options, which we are going to define. We'll use just one
of them. We also have our callback. We're going to leave off the
callback as we've been doing so so far, in favor of promises. As you
can see on the documentation page, it returns a promise if no
callback is passed in, and that's exactly what we expect. Let's go
ahead and start filling out the appropriate arguments for
findOneAndUpdate, kicking things off with the filter. What I'm going to do
is filter by ID. In Robomongo, I can grab the ID of this document.
I'm going to edit it and copy the ID to the clipboard. Now, in Atom,
we can start querying the first object, filter. We're only looking for
documents where the _id equals new ObjectID with the value that we
copied to the clipboard. This is all we need for the filter argument.
Next up is going to be the actual updates we want to apply, and this
is not exactly straightforward. What we have to do here is learn
about the MongoDB update operators.
We can view a complete list of these operators and exactly what
they are by googling mongodb update operators. When I do this, we're
looking for the mongodb.com documentation:
Now this documentation is specific to MongoDB, which means it's
going to work with all of the drivers. In this case, it is going to work
with our Node.js driver. If we scroll down further, we can look at all
of the update operators we have access to. The most important, and
the one we're going to get started with, is the $set operator. This lets
us set a field's value inside of our update, which is exactly what we
want to do. There's other operators, like increment. This one, $inc,
lets you increment a field's value, like the age field in our Users
collection. Although these are super useful, we're going to get
started with $set. In order to use one of these operators, what we
need to do is type it out, $set, and then set it equal to an object. In
this object, these are the things that we're actually going to be
setting. For example, we want to set completed equal to true. If we tried
to put completed equal to true at the root of the object like this, it would
not work as expected. We have to use these update operators, which
means we need this. Now that we have our updates in place using
the set update operator, we can go ahead and provide our third and
final argument. If you head over to the documentation for
findOneAndUpdate, we can take a look at the options real quick. The one we
care about is returnOriginal.
The returnOriginal method is defaulted to true, which means that it
returns the original document, not the updated one, and we don't
want that. When we update a document, we want to get back that
updated document. What we're going to do is set returnOriginal to
false, and that's going to happen in our third and final argument.
This one is also going to be an object, returnOriginal, which is going to
be setting equal to false.
With this in place, we are done. We can tack on a then call to do
something with the results. I'll get my result back and I can simply
print it to the screen, and we can take a look at exactly what comes
back:
db.collection('Todos').findOneAndUpdate({
_id: new ObjectID('5a86c378baa6685dd161da6e')
}, {
$set: {
completed:true
}
}, {
returnOriginal: false
}).then((result) => {
console.log(result);
});
Now, let's go ahead and run this from the Terminal. I'm going to
save my file inside the Terminal. We're going to be running node. The
file is in the playground folder, and we will call it mongodb-update.js. I'm
going to run the following script:
node playground/mongodb-update.js
We get back the value prop, just like we did when we used
findOneAndDelete, and this has our document with the completed value
set to true, which is the brand-new value we just set, which is
fantastic:
If we head over to Robomongo, we can confirm that the value was
indeed updated. We can see this in the old document, where the
value is false. I'm going to open up a new view for Todos:
We have Eat lunch, with a completed value of true. Now that we
have this in place, we know how to insert, delete, update, and read
documents from our MongoDB collections. To wrap this section up,
I want to give you a quick challenge. Over inside of the Users
collection, you should have a document. It should have a name. It's
probably not Jen; it's probably something that you set. What I want
you to do is update this name to your name. Now if it's already your
name, that's fine; you can change it to something else. I also want
you to use $inc, the increment operator that we talked about, to
increment this by 1. Now I'm not going to tell you exactly how
increment works. What I want you to do is head over to the docs,
click on the operator, and then scroll down to see the examples.
There's examples for each operator. It's going to become really
useful for you to learn how to read documentation. Now,
documentation for libraries is not always going to be the same;
everyone does it a little differently; but once you learn how to read
the docs for one library, it gets a lot easier to read the docs for
others, and I can only teach so much in this course. The real goal of
this course is to get you writing your own code, doing your own
research, and looking up your own documentation, so your goal
once again is to update this document, setting the name to
something other than what it's currently set to, and incrementing
the age by 1.
To kick things off, I'm going to grab the ID of the document in
Robomongo, since this is the document I want to update. I'll copy
the ID to the clipboard, and now we can focus on writing that
statement in Atom. First up, we'll update the name, since we
already know how to do that. In Atom, I'm going to go ahead and
duplicate the statement:
db.collection('Todos').findOneAndUpdate({
_id: new ObjectID('57bc4b15b3b6a3801d8c47a2')
}, {
$set: {
completed:true
}
}, {
returnOriginal: false
}).then((result) => {
console.log(result);
});
I'll copy it and paste it. Back inside of Atom, we can start swapping
things out. First up, we're going to swap out the old ID for the new
one, and we're going to change what we passed to set. Instead of
updating completed, we want to update name. I'm going to set the name
equal to something other than Jen. I'm going to go ahead and use my
name, Andrew. Now, we are going to keep returnOriginal set to false. We
want to get the new document back, not the original. Now, the other
thing that we need to do is increment the age. This is going to be
done via the increment operator, which you should have explored
using the documentation over inside of Chrome. If you click on $inc,
it's going to bring you to the $inc part of the documentation, and if
you scroll down, you should be able to see an example. Right here,
we have an example of what it looks like to increment:
We set $inc just like we set set. Then, inside of the object, we specify
the things we want to increment, and the degree to which we want
to increment them. It could be -2, or in our case, it would be
positive, 1. In Atom, we can implement this, as shown in the
following code:
db.collection('Users').findOneAndUpdate({
_id: new ObjectID('57abbcf4fd13a094e481cf2c')
}, {
$set: {
name: 'Andrew'
},
$inc: {
age: 1
}
}, {
returnOriginal: false
}).then((result) => {
console.log(result);
});
I'll set $inc equal to an object, and in there, we'll increment the age by
1. With this in place, we are now done. Before I run this file, I am
going to comment out to the other call to findOneAndUpdate, just leaving
the new one. I also need to swap out the collection. We're no longer
updating the Todos collection; we're updating the Users collection.
Now, we are good to go. We're setting the name equal to Andrew and
we're incrementing the age by 1, which means that we would expect
the age in Robomongo to be 26 instead of 25. Let's go ahead and
run this by restarting the script over in the Terminal:
We can see our new document, where the name is indeed Andrew and
the age is indeed 26, and this is fantastic. Now that you know how to
use the increment operator, you can also go off and learn all of the
other operators you have available to you inside of your update
calls. I can double-check that everything worked as expected in
Robomongo. I'm going to go ahead and refresh the Users collection:
We have our updated document right here. Well, let's wrap this
section up by committing our changes. In the Terminal, I'm going to
run git status so we can view all of the changes to the repository:
Here, we just have one untracked file, our mongodb-update script. I'm
going to use git add . to add that to the next commit, and then I'll use
git commit to actually make the commit. I am going to provide the -m
argument for message so we can specify a message, which is going to
be Add update script:
git add .
git commit -m 'Add update script'
And now we can run the commit command and push it up to
GitHub, so our code is backed up on our GitHub repository:
git push
With updating in place, we now have all of the basic CRUD
(Creating, Reading, Updating, and Deleting) operations down. Up
next, we're going to talk about something called Mongoose, which
we'll be using for the Todo API.
Summary
In this chapter, we started with connecting to MongoDB and
writing data. We then went ahead to understand the id property in
the context of MongoDB. After learning more about fetching data,
we explored different methods to delete data in the documents.
In the next chapter, we will continue to play more with Mongoose,
MongoDB, and REST APIs.
MongoDB, Mongoose, and
REST APIs – Part 2
In this chapter, you're finally going to move out of the playground
folder, and we're going to start playing with Mongoose. We'll be
connecting to our MongoDB database, creating a model, talking
about what exactly a model is, and finally, we'll be saving some data
to the database using Mongoose.
Setting up Mongoose
We're not going to need any of the files we currently have open in
the playground directory, so we can go ahead and close them. We're
also going to wipe the TodoApp database using Robomongo. The data
inside of Robomongo is going to be a little different than the data
we'll be using going forward, and it's best to start with a clean slate.
There is no need to create the database after you drop it because if
you remember, MongoDB is going to automatically create the
database once you start writing data to it. With this in place, we can
now explore Mongoose, and the first thing I always like to do is
check out the website.
You can check the website out by going to mongoosejs.com:
Here, you can find examples, guides, a full list of plugins, and a ton
of great resources. The read the docs resource is the one I use the
most. It includes tutorial-like guides that have examples, as well as
documentation covering every single feature of the library. It really
is a fantastic resource.
If you ever want to learn about something or want to use a feature we don't
cover in the book, I highly recommend coming to this page, taking the
examples, copying and pasting some code, playing around with it, and
figuring out how it works. We're going to be covering most of the essential
Mongoose features right now.
Setting up root of the project
The first thing we need to do before we can actually use Mongoose
in our project is install it. Over in the Terminal, I'm going to install
it using npm i, which is short for npm install. The module name itself is
called mongoose, and we'll be installing the most recent version, which
is going to be version 5.0.6. We're going to tack on the --save flag
since we will need Mongoose for both production and testing
purposes:
npm i mongoose@5.0.6 --save
Once we run this command, it's going to go off and do its thing. We
can move into Atom and start creating the files we're going to need
to run our application.
First up, let's make a folder in the root of the project. This folder is
going to be called server, and everything related to our server is going
to get stored in the server folder. The first file we're going to create is
going to be called server.js. This is going to be the root of our
application. When you want to start up your Node app, you're going
to run this file. This file will get everything ready to go.
The first thing we need to do inside of server.js is load in Mongoose.
We're going to make a variable called mongoose, and we're going to
acquire it from the mongoose library.
var mongoose = require('mongoose');
Now that we have the mongoose variable in place, we need to go
ahead and connect to the database because we can't start writing
data to the database until Mongoose knows how to connect.
Connecting mongoose to
database
The process of connecting is going to be pretty similar to what we
did inside of our MongoDB scripts; for example, the mongodb-connect
script. Here, we called MongoClient.connect, passing in a URL. What
we're going to do for Mongoose is call mongoose.connect, passing in the
exact same URL; mongodb is the protocol, call in //. We're going to be
connecting to our localhost database on port 27017. Next up is going to
be our /, followed by the database name, and we'll continue to use
the TodoApp database, which we used over in the mongodb-connect script.
var mongoose = require('mongoose');
mongoose.connect('mongodb://localhost:27017/TodoApp');
This is where the two functions differ. The MongoClient.connect method
takes a callback, and that is when we have access to the database.
Mongoose is a lot more complex. This is good, because it means our
code can be a lot simpler. Mongoose is maintaining the connection
over time. Imagine I try to save something, save new something. Now
obviously, by the time this save statement runs, mongoose.connect is not
going to have had time to make a database request to connect.
That's going to take a few milliseconds at least. This statement is
going to run almost right away.
Behind the scenes, Mongoose is going to be waiting for the
connection before it ever actually tries to make the query, and this
is one of the great advantages of Mongoose. We don't have to
micromanage the order in which things happen; Mongoose takes
care of that for us.
There is one more thing I want to configure just above
mongoose.connect. We've been using promises in this course, and we're
going to continue using them. Mongoose supports callbacks by
default, but callbacks really aren't how I like to program. I prefer
promises as they're a lot simpler to chain, manage, and scale. Right
above the mongoose.connect statement, we're going to tell Mongoose
which promise library we want to use. If you're not familiar with the
history of promises, it didn't have to always be something built into
JavaScript. Promises originally came from libraries like Bluebird. It
was an idea a developer had, and they created a library. People
started using it, so much so that they added it to the language.
In our case, we need to tell Mongoose that we want to use the built-
in promise library as opposed to some third-party one. We're going
to set mongoose.Promise equal to global.Promise, and this is something we're
only going to have to do once:
var mongoose = require('mongoose');
mongoose.Promise = global.Promise;
mongoose.connect('mongodb://localhost:27017/TodoApp');
We're just going to put these two lines in server.js; we don't have to
add them anywhere else. With this in place, Mongoose is now
configured. We've connected to our database and we've set it up to
use promises, which is exactly what we want. The next thing we're
going to do is create a model.
Creating the todo model
Now, as we have already talked about, inside of MongoDB, your
collections can store anything. I could have a collection with a
document that has an age property, and that's it. I could have a
different document in the same collection with a property name;
that's it. These two documents are different, but they're both in the
same collection. Mongoose likes to keep things a little more
organized than that. What we're going to do is create a model for
everything we want to store. In this example, we'll be creating a
Todo model.
Now, a Todo is going to have certain attributes. It's going to have a
text attribute, which we know is a string; it's going to have a completed
attribute, which we know is a Boolean. These are things we can
define. What we're going to do is create a Mongoose model so
Mongoose knows how to store our data.
Right below the mongoose.connect statement, let's make a variable called
Todo, and we're going to set that equal to mongoose.model. The model is the
method we're going to use to create a new model. It takes two
arguments. The first one is the string name. I'm going to match the
variable name on the left, Todo, and the second argument is going to
be an object.
mongoose.connect('mongodb://localhost:27017/TodoApp');
var Todo = mongoose.model('Todo', {
});
This object is going to define the various properties for a model. For
example, the Todo model is going to have a text property, so we can
set that up. Then, we can set text equal to an object, and we can
configure exactly what text is. We can do the same thing for completed.
We're going to have a completed property, and we're going to want
to specify certain things. Maybe it's required; maybe we have
custom validators; maybe we want to set the type. We're also going
to add one final one, completedApp, and this is going to let us know
when a Todo was completed:
var Todo = mongoose.model('Todo', {
text: {
},
completed: {
},
completedAt: {
}
});
A createdApp property might sound useful, but if you remember the
MongoDB ObjectId, that already has the createdAt timestamp built in,
so there's no reason to add a createdApp property here. completedAt, on
the other hand, is going to add value. It lets you know exactly when
you have completed a Todo.
From here, we can start specifying the details about each attribute,
and there's a ton of different options available inside of the
Mongoose documentation. For now though, we're going to keep
things really simple by specifying the type for each, for
example, text. We can set type equal to String. It's always going to be a
string; it wouldn't make sense if it was a Boolean or a number.
var Todo = mongoose.model('Todo', {
text: {
type: String
},
Next, we can set a type for completed. It needs to be a Boolean; there's
no way around that. We're going to set type equal to Boolean.
completed: {
type: Boolean
},
The last one we have is completedAt. This is going to be a regular old
Unix timestamp, which means it's just a number, so we can set
the type for completedAt equal to Number:
completedAt: {
type: Number
}
});
With this in place, we now have a working Mongoose model. It's a
model of a Todo that has a few properties: text, completed, and
completedAt.
Now in order to illustrate exactly how we create instances of this,
we're going to go ahead and just add one Todo. We're not going to
worry about fetching data, updating data, or deleting data, although
that is stuff that Mongoose supports. We'll be worrying about that
in the following sections, as we start building out the individual
routes for our API. For now, we're going to go over just a very quick
example of creating a brand-new Todo.
Creating a brand-new Todo
I'm going to make a variable called newTodo, although you could call it
anything you like; the name here is not important. What is
important though is that you run the Todo function. This is what
comes back from mongoose.model as a constructor function. We want to
add the new keyword in front of it because we're creating a new
instance of Todo.
Now, the Todo constructor function does take an argument. It's going
to be an object where we can specify some of these properties.
Maybe we know that we want text to equal something like Cook dinner.
Right in the function, we can specify that. text equals a string, Cook
dinner:
var newTodo = new Todo({
text: 'Cook dinner'
});
We haven't required any of our attributes, so we could just stop
here. We have a text property; that's good enough. Let's go ahead
and explore how to save this to the database.
Saving the instance to the
database
Creating a new instance alone does not actually update the
MongoDB database. What we need to do is call a method on newTodo.
This is going to be newTodo.save. The newTodo.save method is going to be
responsible for actually saving text to the MongoDB database.
Now, save returning a promise, which means we can tack on a then
call and add a few callbacks.
newTodo.save().then((doc) => {
}, (e) => {
});
We'll add the callbacks for when the data either gets saved or when
an error occurs because it can't save for some reason. Maybe the
connection failed, or maybe the model is not valid. Either way, for
now we'll just print a little string, console.log(Unable to save todo). Up
above, in the success callback, we're actually going to get that Todo.
I can call the argument doc, and I can print it to the screen, console.log.
I'll print a little message first: Saved todo, and the second argument
will be the actual document:
newTodo.save().then((doc) => {
console.log('Saved todo', doc);
}, (e) => {
console.log('Unable to save todo');
});
We've configured Mongoose, connecting to the MongoDB database;
we've created a model, specifying the attributes we want Todos to
have; we created a new Todo; and finally, we saved it to the
database.
Running the Todos script
We're going to run the script from the Terminal. I'm going to kick
things off by running node. The file we're running is in the server
directory, and it's called server.js:
node server/server.js
When we run the file, we get Saved todo, meaning that things went
well. We have an object right here with an _id property as expected;
the text property, which we specified; and the __v property. The __v
property means version, and it comes from Mongoose. We'll talk
about it later, but essentially it keeps track of the various model
changes over time.
If we open up Robomongo, we're going to see the exact same data.
I'm going to right-click the connection and refresh it. Here, we have
our TodoApp. Inside of the TodoApp database, we have our todos collection:
Notice that Mongoose automatically lowercased and pluralized
Todo. I'm going to view the documents:
We have our one document with the text equal to Cook dinner,
exactly what we created over inside of Atom.
Creating a second Todo model
We have one Todo created using our Mongoose model. What I want
you to do is make a second one, filling out all three values. This
means you're going to make a new Todo with a text value, a completed
Boolean; go ahead and set that to true; and a completedAt timestamp,
which you can set to any number you like. Then, I want you to go
ahead and save it; print it to the screen if it saves successfully; print
an error if it saves poorly. Then, finally, run it.
The first thing I would have done is made a new variable down
below. I'm going to make a variable called otherTodo, setting it equal
to a new instance of the Todo model.
var otherTodo = new Todo ({
});
From here, we can pass in our one argument, which is going to be
the object, and we can specify all of these values. I can set text equal
to whatever I like, for example, Feed the cat. I can set the completed
value equal to true, and I can set completedAt equal to any number.
Anything lower than 0, like -1, is going to go backwards from 1970,
which is where 0 is. Anything positive is going to be where we're at,
and we'll talk about time-stamps more later. For now, I'm going to
go with something like 123, which would basically be two minutes
into the year 1970.
var otherTodo = new Todo ({
text: 'Feed the cat',
completed: true,
completedAt: 123
});
With this in place, we now just need to call save. I'm going to call
otherTodo.save. This is what's actually going to write to the MongoDB
database. I am going to tack on a then callback, because I do want to
do something once the save is complete. If the save method worked,
we're going to get our doc, and I'm going to print it to the screen. I'm
going to use that pretty-print system we talked about earlier,
JSON.stringify, passing in the actual object, undefined, and 2.
var otherTodo = new Todo ({
text: 'Feed the cat',
completed: true,
completedAt: 123
});
otherTodo.save().then((doc) => {
console.log(JSON.stringify(doc, undefined, 2));
})
You don't need to do this; you can print it in any way you like. Next
up, I'm going to print a little message if things go poorly:
console.log('Unable to save', e). It'll pass along that error object, so if
someone's reading the logs, they can see exactly why the call failed:
otherTodo.save().then((doc) => {
console.log(JSON.stringify(doc, undefined, 2));
}, (e) => {
console.log('Unable to save', e);
});
With this in place, we can now comment out that first Todo. This is
going to prevent another one from being created, and we can rerun
the script, running our brand-new Todo creation calls. In the
Terminal, I'm going to shut down the old connection and start up a
new one. This is going to create a brand-new Todo, and we have it
right here:
The text property equals Feed the cat. The completed property sets to the
Boolean true; notice there's no quotes around it. The completedAt
equals the number 123; once again, no quotes. I can also go into
Robomongo to confirm this. I'm going to refetch the Todos
collection, and now we have two Todos:
On the right-hand side of the Values column, you'll also notice the
Type column. Here, we have int32 for completedAt and the __v
property. The completed property is a Boolean, text is a String, and
the _id is an ObjectId type.
There's a lot of useful information hidden inside of Robomongo. If
you want something, they most likely have it built in. That's it for
this one. We now know how to use Mongoose to make a connection,
create a model, and finally save that model to the database.
Validators, Types, and Defaults
In this section, you're going to learn how to improve your Mongoose
models. This is going to let you add things like validation. You can
make certain properties be a requirement, and you can set up smart
defaults. So, if something like completed is not provided, you can
have a default value that gets set. All of this functionality is built
into Mongoose; we just have to learn how to use it.
To illustrate why we'd want to set this stuff up, let's scroll to the
bottom of our server file and remove all of the properties on the new
Todo we created. Then, we're going to save the file and move into the
Terminal, running the script. That's going to be node in the server
directory, and the file is going to be called server.js:
node server/server.js
When we run it, we get our new Todo, but it only has the version
and ID properties:
All of the properties we specified in the model, text, completed, and
completedAt, are nowhere to be found. That's a pretty big problem. We
should not be adding Todos to the database if they don't have a text
property, and things like completed should have smart defaults. No-
one's going to create a Todo item if they already completed it, so
completed should default to false.
Mongoose validators
Now in order to get started, we're going to pull up two pages in the
Mongoose documentation, just so you know where this stuff lives if
you ever want to dive deeper in the future. First up, we're going to
look up the validators. I'm going to google mongoose validators, and this
is going to show us all of the default validation properties we have
built in:
For example, we can set something as required, so if it's not provided
it's going to throw an error when we try to save that model. We can
also set up validators for things like numbers and strings, giving a
min and max value or a minlength/maxlength value for a string.
The other page we're going to look at is the Schemas page. To get to
this, we're going to google mongoose schemas. This is the first one, the
guide.html file:
On this page, you're going to see something slightly different from
what we've been doing so far. They call new Schema, setting up all of
their properties. This is not something we've done yet, but we will in
the future. For now, you can consider this object, the Schema object,
identical to the one we have over in Atom that we pass in as the
second argument to our mongoose.model call.
Customizing the Todo text
property
To kick things off, let's customize how Mongoose treats our text
property. Currently, we tell Mongoose that we want it to be a string,
but we don't have any validators. One of the first things we can do
for the text property is set required equal to true.
var Todo = mongoose.model('Todo', {
text: {
type: String,
required: true
},
When you set required equal to true, the value must exist, so if I were
to try to save this Todo it would fail. And we can prove this. We can
save the file, head over to the Terminal, shut things down, and
restart it:
We get an unreadable error message. We'll dive into this in a
second, but for now all you need to know is that we're getting a
validation error: Todo validation failed, and that is fantastic.
Now, aside from just making sure the text property exists, we can
also set up some custom validators. For strings, for example, we
have a minlength validator, which is great. You shouldn't be able to
create a Todo whose text is an empty string. We can set minlength
equal to the minimum length, which we're is going to be 1 in this
case:
var Todo = mongoose.model('Todo', {
text: {
type: String,
required: true,
minlength: 1
},
Now, even if we do provide a text property in the otherTodo function,
let's say we set text equal to an empty string:
var otherTodo = new Todo ({
text: ''
});
It's still going to fail. It is indeed there but it does not pass the
minlength validator, where the minlength validator must be 1. I can
save the server file, restart things over in the Terminal, and we still
get a failure.
Now aside from required and minlength, there are a couple other utilities
that are around in the docs. One good example is something called
trim. It's fantastic for strings. Essentially, trim trims off any white
space in the beginning or end of your value. If I set trim equal to true,
like this:
var Todo = mongoose.model('Todo', {
text: {
type: String,
required: true,
minlength: 1,
trim: true
},
It's going to remove any leading or trailing white space. So if I try to
create a Todo whose text property is just a bunch of spaces, it's still
going to fail:
var otherTodo = new Todo ({
text: ' '
});
The trim property is going to remove all of the leading and trailing
spaces, leaving an empty string, and if I rerun things, we still get a
failure. The text field is invalid. If we do provide a valid value,
things are going to work as expected. Right in the middle of all of
the spaces in otherTodo, I'm going to provide a real Todo value, which
is going to be Edit this video:
var otherTodo = new Todo ({
text: ' Edit this video '
});
When we try to save this Todo, the first thing that's going to happen
is the spaces in the beginning and the end of the string are going to
get trimmed. Then, it's going to validate that this string has a
minimum length of 1, which it does, and finally, it will save the
Todo to the database. I'm going to go ahead and save server.js,
restart our script, and this time around we get our Todo:
The Edit this video text shows up as the text property. Those leading
and trailing spaces have been removed, which is fantastic. Using
just three properties, we were able to configure our text property,
setting up some validation. Now, we can do similar stuff for completed.
Mongoose defaults
For completed, we're not going to require it because the completed value
is most likely going to default to false. What we can do instead is set
the default property, giving this completed field a default value.
completed: {
type: Boolean,
default: false
},
Now completed, as we talked about earlier in the section, should
default to false. There's no reason to create a Todo if it's already
done. We can do the same thing for completedAt. If a Todo starts off
not completed, then completedAt is not going to exist. It is only going to
exist when the Todo has been completed; it's going to be that
timestamp. What I'm going to do is set default equal to null:
completed: {
type: Boolean,
default: false
},
completedAt: {
type: Number,
default: null
}
Awesome. Now, we have a pretty good schema for our Todo. We're
going to validate that the text is set up properly by the user, and we
are going to set up the completed and completedAt values by our-self since
we can just use defaults. With this in place, I can now rerun our
server file, and here we get a better default Todo:
We have the text property and the user provided, which has been
validated and trimmed. Next, we have completed set to false and
completedAt set to null; this is fantastic. We now have a foolproof
schema that has good defaults and validation.
Mongoose types
If you've been playing around with the various types, you might
have noticed that if you set a type equal to something other than the
type you specified, in certain cases it does still work. For example, if
I try to set text equal to an object, I'm going to get an error. It's going
to say hey, you tried to use a string, but an object showed up
instead. However, if I try to set text equal to something like a
number, I'm going to go with 23:
var otherTodo = new Todo ({
text: 23
});
This is going to work. That's because Mongoose is going to cast your
number into a string, essentially wrapping it in quotes. The same
thing is going to be true with the Boolean. If I pass in a Boolean like
this:
var otherTodo = new Todo ({
text: true
});
The resulting string is going to be "true". I'm going to go ahead and
save the file after setting text equal to true, and run the script:
When I do it, I get text equal to true, as shown in the preceding
screenshot. Notice it is indeed wrapped in quotes. It's important to
be aware that typecasting does exist inside of Mongoose. It can
easily trip you up and cause some unexpected errors. For now
though, I am going to set text equal to a proper string:
var otherTodo = new Todo ({
text: 'Something to do'
});
Creating a Mongoose user
model for authentication
Now, we're going to create a brand-new Mongoose model. First up,
you're going to make a new User model. Eventually, we're going to
use this for authentication. It's going to store stuff like an email and
a password, and the Todos are going to be associated with that User
so when I create one, only I can edit it.
We'll look into all these, but for now, we're going to keep things
really simple. On the User model, the only property that you need to
set up is the email property. We'll set up others like password later, but
it's going to be done a little differently since it needs to be secure.
For now, we'll just stick with email. I want you to require it. I also want
you to trim it, so if someone adds spaces before or after, those spaces
go away. Last but not least, go ahead and set the type equal to a
String, set type, and set minlength of 1. Now, obviously, you'll be able to
pass in a string that's not an email. We'll explore custom validation
a little later. This is going to let us validate that the email is an
email, but for now this is going to get us on the right track.
Once you have your Mongoose model created, I want you to go
ahead and try to create a new User. Create one without the email
property, and then make one with the email property, making sure
that when you run the script, the data shows up as expected over in
Robomongo. This data should show up in the new Users collection.
Setting up the email property
The first thing I'm going to do is make a variable to store this new
model, a variable called User, and I'm going to set that equal to
mongoose.model, which is how we can make our new User model. The first
argument, as you know, needs to be the string model name. I'm
going to use the exact same name as I specified over in the variable,
although it could be different. I just like to keep things using this
pattern, where the variable equals the model name. Next up, as the
second argument, we can specify the object where we configure all
the properties a User should have.
var User = mongoose.model('User', {
});
Now as I mentioned previously, we'll be adding others later, but for
now, adding support for an email property will be good enough.
There's a few things I want to do on this email. First up, I want to
set the type. An email is always going to be a string, so we can set
that type equal to String.
var User = mongoose.model('User', {
email: {
type: String,
}
});
Next up, we're going to require it. You can't make a user without an
email, so I'll set required equal to true. After required, we're going to
go ahead and trim that email. If someone adds spaces before or after
it, it's clearly a mistake, so we'll go ahead and remove those for the
User model, making our application just a little more user-friendly.
Last but not least, what we want to do is set up a minlength validator.
We'll be setting up custom validation later, but for now minlength of 1
is going to get the trick done.
var User = mongoose.model('User', {
email: {
type: String,
required: true,
trim: true,
minlength: 1
}
});
Now, I am going to go ahead and create a new instance of this User
and save it. Before I run the script though, I will be commenting out
our new Todo. Now, we can make a new instance of this User model.
I'm going to make a variable called user and set it equal to new User,
passing in any values we want to set on that user.
var User = mongoose.model('User', {
email: {
type: String,
required: true,
trim: true,
minlength: 1
}
});
var user = new User({
});
I'm going to run it with nothing at first, just to make sure the
validation is working. Next to the user variable, I can now call
user.save. The save method returns a promise, so I can tack on a then
callback. I'm going to add a success case for this one, and an error
handler. The error handler will get that error argument, and the
success case will get the doc. If things go well, I'll print a message
using console.log('User saved', doc), followed by the doc argument. No
need to format it for this example. I'll do the same thing for the
error handler, using console.log('Unable to save user') followed by the
error object:
var user = new User({
});
user.save().then((doc) => {
console.log('User saved', doc);
}, (e) => {
console.log('Unable to save user', e);
});
Since we're creating a user with no properties, we would expect the
error to print. I'm going to save server.js and restart the file:
We get our error. It's a validation error called Path 'email' is
required. Mongoose is letting us know that we do indeed have an
error. The email does need to exist, since we set required equal to true.
I'm going to go ahead and put a value, setting email to my email,
andrew@example.com, and I'll put a few spaces afterwards:
var user = new User({
email: 'andrew@example.com '
});
This time around, things should go as expected and trim should be
trimming the end of that email, removing all of the spaces, and
that's exactly what we get:
The User was indeed saved, which is great, and the email has been
properly formatted. Now obviously, I could have put a string in like
123, and it would have worked because we don't have custom
validation set up just yet, but we have a pretty good starting point.
We have the User model, and we have our email property set up and
ready to go.
With this in place, we are now going to start creating the API. In the
next section, you're going to install a tool called Postman, which is
going to help us test our HTTP requests, and then we're going to
create our very first route for our Todo REST API.
Installing Postman
In this section, you're going to learn how to use Postman. Postman
is an essential tool if you're building a REST API. I have never
worked with a team or on a project where Postman was not heavily
used by every developer involved. Postman lets you create HTTP
requests and fire them off. This makes it really easy to test that
everything you're writing is working as expected. Now obviously, we
will also be writing automated tests, but using Postman lets you
play around with data and see how things work as you move
through your API. It really is a fantastic tool.
We're going to head over to the browser and go to getpostman.com, and
here we can grab their application:
Now I'm going to be using the Chrome application. To install it, all
you have to do is install the Chrome app from the Chrome store,
click Add to Chrome, and it should bring you over to the page where
you can open up the application. Now, to open up Chrome apps,
you have to go to this kind of weird URL. It's chrome://apps. Here, you
can view all of your apps, and we can just open up Postman by
clicking it.
Now as I mentioned previously, Postman lets you make HTTP
requests, so we're going to go ahead and make a few to play around
with the user interface. You do not need to make an account, and
you do not need to sign up for a paid plan. The paid plans are
targeted towards teams of developers who need advanced features.
We are just making basic requests on our machine; we don't need
cloud storage or anything like that. I'm going to skip account
creation, and we can go right to the application.
Here, we can set up our request; this is what happens in the panel:
And, in the white space, we'll be able to view the result. Let's go
ahead and make a request to Google.
Making an HTTP request to
Google
In the URL bar, I'm going to type http://google.com. We can click Send
to send off that request. Make sure you have GET chosen as your
HTTP method. When I fire off the request, it comes back, and all of
the data that comes back is shown in the white space:
We have things like the Status code; we have a 200, meaning things
went great; we have the Time, which took about a quarter of a
second; we have Headers, which are coming back from Google; we
have Cookies, but there's none in this case; and we have our Body
data. The body for google.com is an HTML website. For the most part,
the bodies that we'll be sending and getting in Postman are going to
be JSON since we're building out the REST API.
Illustrating working of the
JSON data
So to illustrate how JSON data works, we're going to make a request
to the geocoding URL that we used earlier in the course. If you
remember, we were able to pass in a location and we got some
JSON back, describing things like the latitude and longitude, and
the formatted address. Now this should still be in your Chrome
history.
If you deleted your history, you can go ahead and put https://maps.goog
leapis.com/maps/api/geocode/json?address=1301+lombard+st+philadelphia in the
address bar. This is the URL I'll be using; you can simply copy it, or
you can grab any JSON API URL. I'm going to copy it to the
clipboard, head back into Postman, and swap out the URL with the
URL I just copied:
Now, I can go ahead and fire off the request. We get our JSON data,
which is fantastic:
We're able to see exactly what comes back when we make this
request, and this is how we're going to be using Postman.
We'll use Postman to make requests, add Todos, delete Todos, get
all of our Todos, and log in; all of that stuff is going to happen right
in here. Remember, APIs don't necessarily have a frontend. Maybe
it's an Android app; maybe it's an iPhone app or a web app; maybe
it's another server. Postman gives us a way to interact with our API,
making sure it works as expected. We have all of the JSON data that
comes back. In the Raw view, which is under Body, we have the raw
data response. Essentially, it's just unprettified; there is no
formatting, there is no colorization. We also have a Preview tab. The
Preview tab is pretty useless for JSON. When it comes to JSON
data., I always stick with the Pretty tab, which should be the default.
Now that we have Postman installed and we know a little bit about
how to use it, we're going to move on to the next section, where we
will actually create our first request. We'll be firing off a Postman
request to hit the URL we're going to create. This is going to let us
make new Todos right from Postman or any other application,
whether it's a web app, a mobile app, or another server. That's all
coming up next, so just make sure you have Postman installed. If
you were able to do everything in this section, you are ready to
continue.
Resource Creation Endpoint -
POST /todos
In this section, you're going to create your HTTP POST route for adding
new Todos. Before we dive into that, we're first going to refactor
everything we have in server.js. We have database configuration stuff
which should live somewhere else and we have our models, which
should also live in separate files. The only thing we want in server.js
is our Express route handlers.
Refactoring the server.js file to
create POST todos route
To get started, inside of the server folder, we're going to make a new
folder called db, and inside of the db folder we'll make a file where all
of this Mongoose configuration will happen. I'm going to call that
file mongoose.js, and all we need to do is take our Mongoose
configuration code right here:
var mongoose = require('mongoose');
mongoose.Promise = global.Promise;
mongoose.connect('mongodb://localhost:27017/TodoApp');
Cut it out, and to move it over into mongoose.js. Now, we need to
export something. What we're going to export is the mongoose variable.
So essentially, when someone requires the mongoose.js file, they're
going to have Mongoose configured and they're going to get it —
they're going to get back the mongoose variable that comes from the
library. I'm going to set module.exports equal to an object, and on that
object we'll set mongoose equal to mongoose:
mongoose.connect('mongodb://localhost:27017/TodoApp');
module.exports = {
mongoose: mongoose
};
Now as we know, in ES6, this can be simplified. If you have a
property and a variable with the same name you can shorten it, and
we can take things a step further and put it all on one line:
module.exports = {mongoose};
Now we have the Mongoose configuration in a separate file, and
that file can be required in the server.js file. I'm going to pull off the
mongoose property using ES6 destructuring. Essentially, we're
creating a local variable called mongoose equal to the mongoose
property on the object, and that object is going to be the return
result from requiring the file we just created. It's in the db directory
and it's called mongoose.js, and we can leave off that extension:
var mongoose = require('./db/mongoose');
Now that Mongoose lives in its own place, let's do the same thing
for Todo and User. This is going to happen in a new folder in a server
called models.
Configuring the Todo and
Users file
Inside of models, we're going to create two files, one for each model.
I'm going to make two new files called todo.js, and user.js. We can
take the todos and Users models from the server.js file and simply
copy and paste them into their appropriate files. Once the model's
copied, we can remove it from server.js. The Todos model is going to
look like this:
var Todo = mongoose.model('Todo', {
text: {
type: String,
required: true,
minlength: 1,
trim: true
},
completed: {
type: Boolean,
default: false
},
completedAt: {
type: Number,
default: null
}
});
The user.js model is going to look like this.
var User = mongoose.model('User', {
email: {
type: String,
required: true,
trim: true,
minlength: 1
}
});
I'm also going to remove everything we have so far, since those
examples in server.js aren't necessary anymore. We can simply
leave our mongoose import statement up at the top.
Inside of these model files, there are a few things we need to do.
First up, we will call the mongoose.model in both Todos and Users files,
so we still need to load in Mongoose. Now, we don't have to load in
the mongoose.js file we created; we can load in the plain old library.
Let's make a variable. We'll call that variable mongoose, and we're
going to require('mongoose'):
var mongoose = require('mongoose');
var Todo = mongoose.model('Todo', {
The last thing that we need to do is export the model, otherwise we
can't use it in files that require this one. I'm going to set module.exports
equal to an object, and we'll set the Todo property equal to the Todo
variable; this is exactly what we did over in mongoose.js:
module.exports = {Todo};
And we're going to do the exact same thing in user.js. Inside of
user.js, up at the top, we'll create a variable called mongoose
requiring mongoose, and at the bottom we'll export the User
model, module.exports, setting it equal to an object where User equals
User:
Var mongoose = require('mongoose');
var User = mongoose.model('User', {
email: {
type: String,
required: true,
trim: true,
minlength: 1
}
});
module.exports = {User};
Now, all three of our files have been formatted. We have our three
new files and our one old one. The last thing left to do is load in Todo
and User.
Loading Todo and User file in
server.js
In the server.js file, let's make a variable using destructuring call Todo,
setting it equal to require('./models/todo'), and we can do the exact
same thing for User. Using ES6 destructuring, we're going to pull off
that User variable, and we're going to get it from the object that
comes back from a call to require, requiring models/user:
var {mongoose} = require('./db/mongoose');
var {Todo} = require('./models/todo');
var {User} = require('./models/user');
With this in place, we are now ready to get going. We have the exact
same setup, only it's been refactored, and this is going to make it a
lot easier to test, update, and manage. The server.js file is just going
to be responsible for our routes.
Configuring the Express
application
Now, to get started, we're going to need to install Express. We've
already done that in the past, so over in the Terminal all we need to
do is run npm i followed by the module name, which is express. We'll
be using the most recent version, 4.16.2.
We're also going to be installing a second module, and we can
actually type that right after the first one. There's no need to run npm
install twice. This one is called the body-parser. The body-parser is going
to let us send JSON to the server. The server can then take that
JSON and do something with it. body-parser essentially parses the
body. It takes that string body and turns it into a JavaScript object.
Now, with body-parser, we're going to be installing version 1.18.2, the
most recent version. I'm also going to provide the --save flag, which
is going to add both Express and body-parser to the dependencies
section of package.json:
npm i express@4.16.2 body-parser@1.18.2 --save
Now, I can go ahead and fire off this request, installing both
modules, and over inside of server.js, we can start configuring our
app.
First up, we have to load in those two modules we just installed. As
I mentioned previously, I like to keep a space between local imports
and library imports. I'm going to use a variable called express to store
the Express library, namely require('express'). We're going to do the
same thing for body-parser with a variable called bodyParser, setting it
equal to the return result from requiring body-parser:
var express = require('express');
var bodyParser = require('body-parser');
var {mongoose} = require('./db/mongoose');
var {Todo} = require('./models/todo');
var {User} = require('./models/user');
Now that we can set up a very basic application. We're going to
make a variable called app; this is going to store our Express
application. I'm going to set this equal to a call to express:
var {User} = require('./models/user');
var app = express();
And we're also going to call app.listen, listening on a port. We will be
deploying this to Heroku eventually. For now though, we're going to
have a local port, port 3000, and we'll provide a callback function
that's going to fire once the app is up. All we're going to do is use
console.log to print Started on port 3000:
var app = express();
app.listen(3000, () => {
console.log('Started on port 3000');
});
Configuring the POST route
Now, we have a very basic server. All we have to do is start
configuring our routes, and as I promised, the one we're going to be
focusing on in this section is the POST route. This is going to let us
create new Todos. Now, inside of your REST APIs, there's the basic
CRUD operations, CRUD being Create, Read, Update, and Delete.
When you want to create a resource, you use the POST HTTP method,
and you send that resource as the body. This means that when we
want to make a new Todo, we're going to send a JSON object over to
the server. It's going to have a text property, and the server is going
to get that text property, create the new model, and send the
complete model with the ID, the completed property, and completedAt
back to the client.
To set up a route, we need to call app.post, passing in the two
arguments we've used for every single Express route, which are our
URL and our callback function that get called with the req and res
objects. Now, the URL for a REST API is really important, and there
is a lot of talk about the proper structure. For resources, what I like
to do is use /todos:
app.post('/todos', (req, res) => {
});
This is for resource creation, and this is a pretty standard setup.
/todos is for creating a new Todo. Later on, when we want to read
Todos, we'll use the GET method, and we will use GET from /todos to get
all Todos or /todos, some crazy number, to get an individual Todo by
its ID. This is a very common pattern, and it's the one we're going to
be using. For now though, we can focus on getting the body data
that was sent from the client.
Getting body data from the
client
To do this, we have to use the body-parser module. As I mentioned
previously, body-parser is going to take your JSON and convert it into
an object, attaching it onto this request object. We're going to
configure the middleware using app.use. The app.use takes the
middleware. If we're writing custom middleware, it'll be a function;
if we're using third-party middleware, we usually just access
something off of the library. In this case, it's going to be
bodyParser.json getting called as a function. The return value from this
JSON method is a function, and that is the middleware that we
need to give to Express:
var app = express();
app.use(bodyParser.json());
With this in place, we can now send JSON to our Express
application. What I'd like to do inside of the post callback is simply
console.log the value of req.body, where the body gets stored by
bodyParser:
app.use(bodyParser.json());
app.post('/todos', (req, res) => {
console.log(req.body);
});
We can now start up the server and test things out inside of
Postman.
Testing the POST route inside Postman
In the Terminal, I'm going to use clear to clear the Terminal output,
and then I'll run the app:
node server/server.js
The server is up on port 3000, which means we can now head into
Postman:
Inside of Postman, we're not going to be making a GET request like
we did in the previous section. This time, what we're going to be
doing is making a POST request, which means we need to change
the HTTP method to POST, and type the URL. That's going to
be localhost:3000 for the port, /todos. This is the URL that we want to
send our data to:
Now in order to send some data to the application, we have to go to
the Body tab. We're trying to send JSON data, so we're going to go
to raw and select JSON (application/json) from the drop-down list
on the right-hand side:
Now we have our Header set. This is the Content-Type header,
letting the server know that JSON is getting sent. All of this is done
automatically with Postman. Inside of Body, the only piece of
information I'm going to attach to my JSON is a text property:
{
"text": "This is from postman"
}
Now we can click Send to fire off our request. We're never going to
get a response because we haven't responded to it inside of server.js,
but if I head over to the Terminal, you see we have our data:
This is the data we created inside of Postman. It's now showing up
in our Node application, which is fantastic. We are one step closer
to actually creating that Todo. The only thing left to do inside of the
post handler is to actually create the Todo using the information
that comes from the User.
Creating an instance of
Mongoose model
Inside server.js, let's make a variable called todo to do what we've
done previously, creating an instance of a Mongoose model. We're
going to set it equal to new Todo, passing in our object and passing in
the values we want to set. In this case, we just want to set text. We're
going to set text to req.body, which is the object we have, and then
we're going to access the text property, like so:
app.post('/todos', (req, res) => {
var todo = new Todo({
text: req.body.text
});
Next up, we're going to call todo.save. This is going to actually save
the model to the database, and we're going to be providing a
callback for a success case and an error case.
app.post('/todos', (req, res) => {
var todo = new Todo({
text: req.body.text
});
todo.save().then((doc) => {
}, (e) => {
});
Now if things go well, we're going to be sending back the actual
Todo which is going to show up in the then callback. I'm going to
get the doc, and right inside of the callback function, I'm going to use
res.send to send the doc back. This is going to give the User really
important information, things like the ID and the completed and
completedAt properties, which were not set by the User. If things go
poorly and we get an error, that's fine too. All we're going to do is
use res.send to send that error back:
todo.save().then((doc) => {
res.send(doc);
}, (e) => {
res.send(e);
});
We'll be modifying how we send errors back a little later. For now,
this code is going to work just great. We can also set an HTTP
status.
Setting up HTTP status code
If you remember, HTTP statuses let you give someone some
information about how the request went. Did it go well? Did it go
poorly? That kind of thing. You can get a list of all the HTTP
statuses available to you by going to httpstatuses.com. Here, you can
view all of the statuses that you can set:
The one that's set by default by Express is 200. This means that
things went OK. What we're going to be using for an error is
code 400. A 400 status means there was some bad input, which is
going to be the case if the model can't be saved. Maybe the User
didn't provide a text property, or maybe the text string was empty.
Either way, we want to send a 400 back, and that's going to happen.
Right before we call send, all we're going to do is call status, passing in
the status of 400:
todo.save().then((doc) => {
res.send(doc);
}, (e) => {
res.status(400).send(e);
});
With this in place, we are now ready to test out our POST /todos
request over inside of Postman.
Testing POST /todos inside of
Postman
I'm going to restart the server in the Terminal. You could start this
up with nodemon if you like. For the moment, I'll be manually
restarting it:
nodemon server/server.js
We're now up on localhost 3000, and inside of Postman, we can
make the exact same request we made earlier. I'm going to click on
Send:
We get a Status of 200. This is fantastic; it's the default status,
which means things went great. The JSON response is exactly what
we expected. We have our text that we set; we have the _id property
which was generated; we have completedAt, which is set to null, the
default; and we have completed set to false, the default.
We could also test what happens when we try to create a Todo
without the proper information. For example, maybe I set a text
property equal to an empty string. If I send this over, we now get a
400 Bad Request:
Now, we have a bunch of validation code saying that the Todo
validation failed. Then, we can go into the errors object to get the
specific error. Here, we can see the text field failed, and the message is
Path 'text' is required. All of this information can help someone fix
their request and make a proper one.
Now if I head over into Robomongo, I'm going to refresh the
collection for todos. Look at the last one, and it is indeed the one we
created in Postman:
The text is equal to This is from postman. With this in place, we
now have our very first HTTP endpoint set up for the Todo REST
API.
Now I haven't talked exactly about what REST is. We're going to
talk about that later. For now, we're going to focus on creating these
endpoints. The REST version will come up a little later when we
start adding authentication.
Adding more Todos to the
database
Over inside of Postman, we can add a few more Todos, which is
what I'm going to do. Charge my phone—I don't think I've ever needed to
be reminded of that one—and we'll add Take a break for lunch. In the
Pretty section, we see the Charge my phone Todo was created with a
unique ID. I'm going to send off the second one, and we'll see that
the Take a break for lunch Todo was created:
Over inside of Robomongo, we can give our todos collection a final
refresh. I'm going to expand those last three items, and they are
indeed the three items we created in Postman:
Now that we have some meaningful work done in our project, let's
go ahead and commit our changes. As you can see over in Atom, the
server directory is green, meaning that it hasn't been added to Git,
and the package.json file is orange, which means that it's been
modified, even though Git is tracking it. Over in the Terminal we
can shut down the server, and I always like to run git status to do a
sanity check:
Here, everything does look as expected. I can it using git add . to add
everything, followed by one more sanity check:
Here, we have our four new files in the server folder, as well as our
package.json file.
Now, it's time to make that commit. I'm going to create a quick
commit. I'm using the -am flag, which usually adds modified files.
Since I already used add, I can simply use the -m flag, like we've been
doing all the way through the course. A good message for this one
would be something like Add POST /todos route and refactor mongoose:
git commit -m 'Add POST /todos route and refractor mongoose'
With the commit in place, we can now wrap things up by pushing it
up to GitHub, making sure it's backed up, and making sure it's
available for anyone else collaborating on the project. Remember,
creating a commit alone does not get it up on GitHub; you've got to
push that with another command, namely git push. With that in
place, it's now time to move on to the next section, where you will
be testing the route you just created.
Testing POST /todos
In this section, you're going to learn how to set up the test suite for
the Todo API, similar to what we did in the test section, and we'll be
writing two test cases for /todos. We're going to verify that when we
send the correct data as the body, we get a 200 back with the
completed doc, including the ID; and, if we send bad data, we
expect a 400 back with the error object.
Installing npm modules for
testing POST /todos route
Now before we can do any of this, we have to install all of those
modules we installed in the test section, expect for assertions, mocha for
the entire test suite, supertest to test our Express routes, and nodemon.
The nodemon module is going to let us create that test-watch script we
had, so we can automatically restart the test suite. Now I know you
have nodemon installed globally, but since we are using it inside of a
package.json script, it's a great idea to install it locally as well.
We're going to run npm i with expect version 22.3.0, the most recent.
Next up is going to be mocha. The most recent version is 5.0.1. After
that is nodemon version 1.15.0, and last but not least is supertest at
version 3.0.0. With this in place, all we have to do is tack on that --
save-dev flag. We want to save these, but not as regular dependencies.
They're for testing purposes only, so we're going to save them as
devDependencies:
npm i expect@22.3.0 mocha@5.0.1 nodemon@1.15.0 supertest@3.0.0 --save-dev
Now, we can go ahead and run this command, and once it's done
we'll be able to start setting up the test files inside of Atom.
Setting up the test files
In Atom, inside my package.json file, I now have my devDependencies listed
out:
Now, my output for this command might look a little different than
yours. npm is caching some of my modules that I've installed
recently, so as you can see in the preceding screenshot, it's just
grabbing the local copy. They did indeed get installed though, and I
can prove that by opening up the node_modules folder.
We're now going to create a folder inside the server where we can
store all of our test files, and this folder is going to be called tests.
The only file we're going to worry about creating for this section is a
test file for server.js. I'm going to make a new file in tests called
server.test.js. This is the extension we'll be using for test files in the
chapter. Inside of the server.test file, we can now kick things off by
requiring a lot of those modules. We're going to require the supertest
module and expect. The mocha and nodemon modules do not need to be
required; that's not how they're used.
The const expect variable we'll get will be equal to require('expect'), and
we'll do the exact same thing for supertest, using const:
const expect = require('expect');
const request = require('supertest');
Now that we have these in place, we need to load in some of our
local files. We need to load in server.js so we have access to the
Express app since we need that for super-test, and we also want to
load in our Todo model. As you'll see a little later, we're going to be
querying the database, and having access to this model is going to
be necessary. Now the model already exports something, but
server.js currently exports nothing. We can fix this by adding
module.exports to the very bottom of the server.js file, setting it equal to
an object. On that object, all we're going to do is set the app property
equal to the app variable, using the ES6 object syntax.
module.exports = {app};
With this in place, we are now ready to load those two files in.
Loading the test files
First up, let's go ahead and create a local variable called app, and
we're going to be using ES6 destructuring to pull it off of the return
result from requiring the server file. Here, we're going to start by
getting the relative path. Then, we're going to go back one directory
from tests into server. The filename is simply server without the
extension. We can do the exact same thing for the Todo model as
well.
We're going to make a constant called Todo. We're using ES6
destructuring to pull that off of the export, and the file is from the
relative path, back a directory. Then we have to go into the models
directory, and finally, the filename is called todo:
const expect = require('expect');
const request = require('supertest');
const {app} = require('./../server');
const {Todo} = require('./../models/todo');
And now that we have all of this loaded in, we are ready to create
our describe block and add our test cases.
Adding describe block for the
test cases
I'm going to use describe to group all of the routes. I'm going to have
multiple test cases for some routes, and it's nice to add a describe
block so you can quickly glance at the test output in the Terminal.
The describe block for POST Todos will simply be called POST /todos.
Then, we can add our arrow function (=>), and inside of here we can
start laying out our test cases. The first test is going to verify that
when we send the appropriate data, everything goes as expected:
const {Todo} = require('./../models/todo');
describe('POST /todos', () => {
it('should create a new todo')
});
Now, we can add our callback function, and this function is going to
take the done argument because this is going to be an asynchronous
test. You have to specify done, otherwise this test is not going to work
as expected. In the callback function, what we're going to do is
create a variable called text. This is the only setup data we really
need. We just need a string, and we're going to use that string
throughout. Go ahead and give this any value you like. I'm going to
use Test todo text.
describe('POST /todos', () => {
it('should create a new todo',(done) => {
var text = 'Test todo text';
});
});
Now it's time to start making that request via supertest. We only
made GET requests previously, but POST requests are just as easy.
Making the POST requests via
supertest
We're going to call request, passing in the app we want to make the
request on. Next up, we're going to call .post, which sets up a POST
request. We're going to go to /todos, and the new thing we're going to
do is actually send data. In order to send data along with the
request as the body we have to call send, and we're going to pass in
an object. This object is going to get converted to JSON by supertest,
so there's no need for us to worry about that—just another great
reason to use the supertest library. We're going to set text equal to the
text variable shown previously, and we can use the ES6 syntax to get
that done:
describe('POST /todos', () => {
it('should create a new todo',(done) => {
var text = 'Test todo text';
request(app)
.post('/todos')
.send({text})
})
});
Now that we've sent the request, we can start making assertions
about the request.
Making assertions about the
POST request
We'll start with the status. I'm going to expect that the status equals
200, which should be the case when we send across valid data. After
this, we can go ahead and make an assertion about the body that
comes back. We want to make sure the body is an object and that it
has the text property equal to the one we specified previously. That's
exactly what it should be doing when it sends the body back.
Over inside of server.test.js, we can get that done by creating a
custom expect assertion. If you can recall, our custom expect calls do
get passed in the response, and we can use that response inside of
the function. We're going to expect that the response body has a text
property and that the text property equals using toBe, the text string
we have defined:
request(app)
.post('/todos')
.send({text})
.expect(200)
.expect((res) => {
expect(res.body.text).toBe(text);
})
If that's the case, great; this will pass. If not, that's fine too. We're
just going to throw an error and the test will fail. The next thing we
need to do is call end to wrap things up, but we're not quite done
yet. What we want to do is actually check what got stored in the
MongoDB collection, and this is why we loaded in the model.
Instead of passing done into end like we did previously, we're going
to pass in a function. This function will get called with an error, if
any, and the response:
request(app)
.post('/todos')
.send({text})
.expect(200)
.expect((res) => {
expect(res.body.text).toBe(text);
})
.end((err, res) => {
});
This callback function is going to allow us to do a few things. First
up, let's handle any errors that might have occurred. This will be if
the status wasn't 200, or if the body doesn't have a text property equal
to the text property we sent in. All we have to do is check if an error
exists. If an error does exist, all we're going to do is pass it into done.
This is going to wrap up the test, printing the error to the screen, so
the test will indeed fail. I'm also going to return this result.
.end((err, res) => {
if(err) {
return done(err);
}
});
Now, returning it doesn't do anything special. All it does is stop the
function execution. Now, we're going to make a request to the
database fetching all the Todos, verifying that our one Todo was
indeed added.
